On 2019-08-13 13:27, Hans Verkuil wrote: > On 8/13/19 12:18 PM, Jonas Karlman wrote: >> As an alternative I have a patch [1] to submit that moves cec_notifier_phys_addr_invalidate() call >> from dw_hdmi_irq() to dw_hdmi_connector_detect() in order to address an issue with >> stale CEC phys addr and stale EDID/ELD data after TV or AVR uses a 100ms HPD pulse >> to signal EDID has changed, full patchset at [2]. >> >> At the moment CEC phys address is invalidated directly at HPD, leaving the address as invalid >> after a 100ms HPD pulse, phys address may later be restored to a valid phys address when >> get_modes() is called by drm core. >> >> Should I wait on your and related patches to be merged before submitting my series? > Your patch fixes this issue as well, so just ignore my patch and submit your series. > Please CC me when you post your series. Thanks for testing, I will include you in CC when I submit my series later today or tomorrow. Regards, Jonas > > Regards, > > Hans > >> [1] https://github.com/Kwiboo/linux-rockchip/commit/2f4f99c82983e70952668c21f1c56a0241bd75f2 >> [2] https://github.com/Kwiboo/linux-rockchip/compare/next-20190813...next-20190813-cec-eld >> >> Regards, >> Jonas >> >> On 2019-08-13 11:34, Hans Verkuil wrote: >>> CC Dariusz as well, since this issue was discovered when testing his >>> CEC patches. >>> >>> Regards, >>> >>> Hans >>> >>> On 8/13/19 11:32 AM, Hans Verkuil wrote: >>>> When testing CEC on the AML-S905X-CC board I noticed that the CEC physical >>>> address was not invalidated when the HDMI cable was unplugged. Some more >>>> digging showed that meson uses meson_dw_hdmi.c to handle the HPD. >>>> >>>> Both dw_hdmi_irq() and dw_hdmi_top_thread_irq() (in meson_dw_hdmi.c) call >>>> the dw_hdmi_setup_rx_sense() function. So move the code to invalidate the >>>> CEC physical address to that function, so that it is independent of where >>>> the HPD interrupt happens. >>>> >>>> Tested with both a AML-S905X-CC and a Khadas VIM2 board. >>>> >>>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> >>>> --- >>>> Note: an alternative would be to make a new dw-hdmi function such as >>>> dw_hdmi_cec_phys_addr_invalidate() that is called from meson_dw_hdmi.c. >>>> I decided not to do that since this patch is minimally invasive, but >>>> that can obviously be changed if that approach is preferred. >>>> --- >>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> index c5a854af54f8..e899b31e1432 100644 >>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> @@ -2329,6 +2329,13 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense) >>>> dw_hdmi_update_power(hdmi); >>>> dw_hdmi_update_phy_mask(hdmi); >>>> } >>>> + if (!hpd && !rx_sense) { >>>> + struct cec_notifier *notifier = READ_ONCE(hdmi->cec_notifier); >>>> + >>>> + if (notifier) >>>> + cec_notifier_phys_addr_invalidate(notifier); >>>> + } >>>> + >>>> mutex_unlock(&hdmi->mutex); >>>> } >>>> EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense); >>>> @@ -2369,14 +2376,6 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) >>>> dw_hdmi_setup_rx_sense(hdmi, >>>> phy_stat & HDMI_PHY_HPD, >>>> phy_stat & HDMI_PHY_RX_SENSE); >>>> - >>>> - if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) { >>>> - struct cec_notifier *notifier; >>>> - >>>> - notifier = READ_ONCE(hdmi->cec_notifier); >>>> - if (notifier) >>>> - cec_notifier_phys_addr_invalidate(notifier); >>>> - } >>>> } >>>> >>>> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { >>>> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
