Sam,
Den 11.08.2019 01.10, skrev Laurent Pinchart:
> This panel is used on the Gumstix Overo Palo35.
>
> The code is based on the omapdrm-specific panel-lgphilips-lb035q02
> driver.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
<snip>
> diff --git a/drivers/gpu/drm/panel/panel-lg-lb035q02.c b/drivers/gpu/drm/panel/panel-lg-lb035q02.c
<snip>
> +static int lb035q02_write(struct lb035q02_device *lcd, u16 reg, u16 val)
> +{
> + struct spi_message msg;
> + struct spi_transfer index_xfer = {
> + .len = 3,
> + .cs_change = 1,
> + };
> + struct spi_transfer value_xfer = {
> + .len = 3,
> + };
> + u8 buffer[16];
> +
> + spi_message_init(&msg);
> +
> + /* register index */
> + buffer[0] = 0x70;
> + buffer[1] = 0x00;
> + buffer[2] = reg & 0x7f;
> + index_xfer.tx_buf = buffer;
> + spi_message_add_tail(&index_xfer, &msg);
> +
> + /* register value */
> + buffer[4] = 0x72;
> + buffer[5] = val >> 8;
> + buffer[6] = val;
> + value_xfer.tx_buf = buffer + 4;
> + spi_message_add_tail(&value_xfer, &msg);
> +
> + return spi_sync(lcd->spi, &msg);
> +}
Just a note to Sam:
This is the same spi protocol that the ili9325 controller on the hy28b
panel uses.
I remembered that I have experimented with a regmap implementation:
https://github.com/notro/tinydrm/blob/master/tinydrm-ili9325.c#L191
Noralf.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
