Use the drm_panel_(enable|disable|get_modes) functions. Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx> Cc: Vincent Abriou <vincent.abriou@xxxxxx> --- drivers/gpu/drm/sti/sti_dvo.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c index 9e6d5d8b7030..e55870190bf5 100644 --- a/drivers/gpu/drm/sti/sti_dvo.c +++ b/drivers/gpu/drm/sti/sti_dvo.c @@ -221,8 +221,7 @@ static void sti_dvo_disable(struct drm_bridge *bridge) writel(0x00000000, dvo->regs + DVO_DOF_CFG); - if (dvo->panel) - dvo->panel->funcs->disable(dvo->panel); + drm_panel_disable(dvo->panel); /* Disable/unprepare dvo clock */ clk_disable_unprepare(dvo->clk_pix); @@ -262,8 +261,7 @@ static void sti_dvo_pre_enable(struct drm_bridge *bridge) if (clk_prepare_enable(dvo->clk)) DRM_ERROR("Failed to prepare/enable dvo clk\n"); - if (dvo->panel) - dvo->panel->funcs->enable(dvo->panel); + drm_panel_enable(dvo->panel); /* Set LUT */ writel(config->lowbyte, dvo->regs + DVO_LUT_PROG_LOW); @@ -340,7 +338,7 @@ static int sti_dvo_connector_get_modes(struct drm_connector *connector) struct sti_dvo *dvo = dvo_connector->dvo; if (dvo->panel) - return dvo->panel->funcs->get_modes(dvo->panel); + return drm_panel_get_modes(dvo->panel); return 0; } -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel