Hi, On Thu, Jul 25, 2019 at 05:18:29PM +0200, Torsten Duwe wrote: > The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed > for portable devices. > > Add a binding document for it. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Torsten Duwe <duwe@xxxxxxx> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/display/bridge/anx6345.yaml | 90 ++++++++++ > 1 file changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > new file mode 100644 > index 000000000000..0af092d101c5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > @@ -0,0 +1,90 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analogix ANX6345 eDP Transmitter Device Tree Bindings > + > +maintainers: > + - Torsten Duwe <duwe@xxxxxx> > + > +description: | > + The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for > + portable devices. > + > +properties: > + compatible: > + const: analogix,anx6345 > + > + reg: > + maxItems: 1 > + description: I2C address of the device > + > + reset-gpios: > + maxItems: 1 > + description: active low GPIO to use for reset > + > + dvdd12-supply: > + maxItems: 1 > + description: Regulator for 1.2V digital core power. > + $ref: /schemas/types.yaml#/definitions/phandle > + > + dvdd25-supply: > + maxItems: 1 > + description: Regulator for 2.5V digital core power. > + $ref: /schemas/types.yaml#/definitions/phandle There's no need to specify the type here, all the properties ending in -supply are already checked for that type > + ports: > + type: object > + minItems: 1 > + maxItems: 2 > + description: | > + Video port 0 for LVTTL input, > + Video port 1 for eDP output (panel or connector) > + using the DT bindings defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt You should probably describe the port@0 and port@1 nodes here as well. It would allow you to express that the port 0 is mandatory and the port 1 optional, which got dropped in the conversion. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
