Some files got renamed but probably due to some merge conflicts,
a few references still point to the old locations.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
Acked-by: Wolfram Sang <wsa@xxxxxxxxxxxxx> # I2C part
Reviewed-by: Jerry Hoemann <jerry.hoemann@xxxxxxx> # hpwdt.rst
---
Documentation/RCU/rculist_nulls.txt | 2 +-
Documentation/devicetree/bindings/arm/idle-states.txt | 2 +-
Documentation/locking/spinlocks.rst | 4 ++--
Documentation/memory-barriers.txt | 2 +-
Documentation/translations/ko_KR/memory-barriers.txt | 2 +-
Documentation/watchdog/hpwdt.rst | 2 +-
MAINTAINERS | 10 +++++-----
drivers/gpu/drm/drm_modes.c | 2 +-
drivers/i2c/busses/i2c-nvidia-gpu.c | 2 +-
drivers/scsi/hpsa.c | 4 ++--
10 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 8151f0195f76..23f115dc87cf 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -1,7 +1,7 @@
Using hlist_nulls to protect read-mostly linked lists and
objects using SLAB_TYPESAFE_BY_RCU allocations.
-Please read the basics in Documentation/RCU/listRCU.txt
+Please read the basics in Documentation/RCU/listRCU.rst
Using special makers (called 'nulls') is a convenient way
to solve following problem :
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index 326f29b270ad..2d325bed37e5 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -703,4 +703,4 @@ cpus {
https://www.devicetree.org/specifications/
[6] ARM Linux Kernel documentation - Booting AArch64 Linux
- Documentation/arm64/booting.txt
+ Documentation/arm64/booting.rst
diff --git a/Documentation/locking/spinlocks.rst b/Documentation/locking/spinlocks.rst
index 098107fb7d86..e93ec6645238 100644
--- a/Documentation/locking/spinlocks.rst
+++ b/Documentation/locking/spinlocks.rst
@@ -82,7 +82,7 @@ itself. The read lock allows many concurrent readers. Anything that
**changes** the list will have to get the write lock.
NOTE! RCU is better for list traversal, but requires careful
- attention to design detail (see Documentation/RCU/listRCU.txt).
+ attention to design detail (see Documentation/RCU/listRCU.rst).
Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
time need to do any changes (even if you don't do it every time), you have
@@ -90,7 +90,7 @@ to get the write-lock at the very beginning.
NOTE! We are working hard to remove reader-writer spinlocks in most
cases, so please don't add a new one without consensus. (Instead, see
- Documentation/RCU/rcu.txt for complete information.)
+ Documentation/RCU/rcu.rst for complete information.)
----
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 045bb8148fe9..1adbb8a371c7 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -548,7 +548,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
[*] For information on bus mastering DMA and coherency please read:
- Documentation/PCI/pci.rst
+ Documentation/driver-api/pci/pci.rst
Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index a33c2a536542..2774624ee843 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -569,7 +569,7 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE
[*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다:
- Documentation/PCI/pci.rst
+ Documentation/driver-api/pci/pci.rst
Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst
index c165d92cfd12..c824cd7f6e32 100644
--- a/Documentation/watchdog/hpwdt.rst
+++ b/Documentation/watchdog/hpwdt.rst
@@ -63,7 +63,7 @@ Last reviewed: 08/20/2018
and loop forever. This is generally not what a watchdog user wants.
For those wishing to learn more please see:
- Documentation/kdump/kdump.rst
+ Documentation/admin-guide/kdump/kdump.rst
Documentation/admin-guide/kernel-parameters.txt (panic=)
Your Linux Distribution specific documentation.
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e2a525e22c0..51bdbd230174 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -899,7 +899,7 @@ L: linux-iio@xxxxxxxxxxxxxxx
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/adc/ad7124.c
-F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
ANALOG DEVICES INC AD7606 DRIVER
M: Stefan Popa <stefan.popa@xxxxxxxxxx>
@@ -4190,7 +4190,7 @@ M: Jens Axboe <axboe@xxxxxxxxx>
L: cgroups@xxxxxxxxxxxxxxx
L: linux-block@xxxxxxxxxxxxxxx
T: git git://git.kernel.dk/linux-block
-F: Documentation/cgroup-v1/blkio-controller.rst
+F: Documentation/admin-guide/cgroup-v1/blkio-controller.rst
F: block/blk-cgroup.c
F: include/linux/blk-cgroup.h
F: block/blk-throttle.c
@@ -6317,7 +6317,7 @@ FLEXTIMER FTM-QUADDEC DRIVER
M: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
L: linux-iio@xxxxxxxxxxxxxxx
S: Maintained
-F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quadddec
+F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt
F: drivers/counter/ftm-quaddec.c
@@ -6856,7 +6856,7 @@ R: Sagi Shahar <sagis@xxxxxxxxxx>
R: Jon Olson <jonolson@xxxxxxxxxx>
L: netdev@xxxxxxxxxxxxxxx
S: Supported
-F: Documentation/networking/device_drivers/google/gve.txt
+F: Documentation/networking/device_drivers/google/gve.rst
F: drivers/net/ethernet/google
GPD POCKET FAN DRIVER
@@ -12137,7 +12137,7 @@ M: Thomas Hellstrom <thellstrom@xxxxxxxxxx>
M: "VMware, Inc." <pv-drivers@xxxxxxxxxx>
L: virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
S: Supported
-F: Documentation/virt/paravirt_ops.txt
+F: Documentation/virt/paravirt_ops.rst
F: arch/*/kernel/paravirt*
F: arch/*/include/asm/paravirt*.h
F: include/linux/hypervisor.h
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 74a5739df506..80fcd5dc1558 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1686,7 +1686,7 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len,
*
* Additionals options can be provided following the mode, using a comma to
* separate each option. Valid options can be found in
- * Documentation/fb/modedb.txt.
+ * Documentation/fb/modedb.rst.
*
* The intermediate drm_cmdline_mode structure is required to store additional
* options from the command line modline like the force-enable/disable flag.
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index cfc76b5de726..5a1235fd86bb 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev)
/*
* We need gpu_i2c_suspend() even if it is stub, for runtime pm to work
* correctly. Without it, lspci shows runtime pm status as "D0" for the card.
- * Documentation/power/pci.txt also insists for driver to provide this.
+ * Documentation/power/pci.rst also insists for driver to provide this.
*/
static __maybe_unused int gpu_i2c_suspend(struct device *dev)
{
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 43a6b5350775..eaf6177ac9ee 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7798,7 +7798,7 @@ static void hpsa_free_pci_init(struct ctlr_info *h)
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
/*
* call pci_disable_device before pci_release_regions per
- * Documentation/PCI/pci.rst
+ * Documentation/driver-api/pci/pci.rst
*/
pci_disable_device(h->pdev); /* pci_init 1 */
pci_release_regions(h->pdev); /* pci_init 2 */
@@ -7881,7 +7881,7 @@ static int hpsa_pci_init(struct ctlr_info *h)
clean1:
/*
* call pci_disable_device before pci_release_regions per
- * Documentation/PCI/pci.rst
+ * Documentation/driver-api/pci/pci.rst
*/
pci_disable_device(h->pdev);
pci_release_regions(h->pdev);
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
