On Thu, Jul 25, 2019 at 06:02:13PM -0400, Paul Cercueil wrote: > The JZ4740 boards now use the iio-hwmon driver. > > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> > Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > drivers/hwmon/Kconfig | 10 --- > drivers/hwmon/Makefile | 1 - > drivers/hwmon/jz4740-hwmon.c | 135 ----------------------------------- > 3 files changed, 146 deletions(-) > delete mode 100644 drivers/hwmon/jz4740-hwmon.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 650dd71f9724..2199ac1d0ba7 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -660,16 +660,6 @@ config SENSORS_IT87 > This driver can also be built as a module. If so, the module > will be called it87. > > -config SENSORS_JZ4740 > - tristate "Ingenic JZ4740 SoC ADC driver" > - depends on MACH_JZ4740 && MFD_JZ4740_ADC > - help > - If you say yes here you get support for reading adc values from the ADCIN > - pin on Ingenic JZ4740 SoC based boards. > - > - This driver can also be built as a module. If so, the module will be > - called jz4740-hwmon. > - > config SENSORS_JC42 > tristate "JEDEC JC42.4 compliant memory module temperature sensors" > depends on I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 8db472ea04f0..1e82e912a5c4 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -85,7 +85,6 @@ obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o > obj-$(CONFIG_SENSORS_INA3221) += ina3221.o > obj-$(CONFIG_SENSORS_IT87) += it87.o > obj-$(CONFIG_SENSORS_JC42) += jc42.o > -obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o > obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o > obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o > obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o > diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c > deleted file mode 100644 > index bec5befd1d8b..000000000000 > --- a/drivers/hwmon/jz4740-hwmon.c > +++ /dev/null > @@ -1,135 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@xxxxxxxxxx> > - * JZ4740 SoC HWMON driver > - */ > - > -#include <linux/err.h> > -#include <linux/interrupt.h> > -#include <linux/kernel.h> > -#include <linux/module.h> > -#include <linux/mutex.h> > -#include <linux/platform_device.h> > -#include <linux/slab.h> > -#include <linux/io.h> > - > -#include <linux/completion.h> > -#include <linux/mfd/core.h> > - > -#include <linux/hwmon.h> > - > -struct jz4740_hwmon { > - void __iomem *base; > - int irq; > - const struct mfd_cell *cell; > - struct platform_device *pdev; > - struct completion read_completion; > - struct mutex lock; > -}; > - > -static irqreturn_t jz4740_hwmon_irq(int irq, void *data) > -{ > - struct jz4740_hwmon *hwmon = data; > - > - complete(&hwmon->read_completion); > - return IRQ_HANDLED; > -} > - > -static ssize_t in0_input_show(struct device *dev, > - struct device_attribute *dev_attr, char *buf) > -{ > - struct jz4740_hwmon *hwmon = dev_get_drvdata(dev); > - struct platform_device *pdev = hwmon->pdev; > - struct completion *completion = &hwmon->read_completion; > - long t; > - unsigned long val; > - int ret; > - > - mutex_lock(&hwmon->lock); > - > - reinit_completion(completion); > - > - enable_irq(hwmon->irq); > - hwmon->cell->enable(pdev); > - > - t = wait_for_completion_interruptible_timeout(completion, HZ); > - > - if (t > 0) { > - val = readw(hwmon->base) & 0xfff; > - val = (val * 3300) >> 12; > - ret = sprintf(buf, "%lu\n", val); > - } else { > - ret = t ? t : -ETIMEDOUT; > - } > - > - hwmon->cell->disable(pdev); > - disable_irq(hwmon->irq); > - > - mutex_unlock(&hwmon->lock); > - > - return ret; > -} > - > -static DEVICE_ATTR_RO(in0_input); > - > -static struct attribute *jz4740_attrs[] = { > - &dev_attr_in0_input.attr, > - NULL > -}; > - > -ATTRIBUTE_GROUPS(jz4740); > - > -static int jz4740_hwmon_probe(struct platform_device *pdev) > -{ > - int ret; > - struct device *dev = &pdev->dev; > - struct jz4740_hwmon *hwmon; > - struct device *hwmon_dev; > - > - hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL); > - if (!hwmon) > - return -ENOMEM; > - > - hwmon->cell = mfd_get_cell(pdev); > - > - hwmon->irq = platform_get_irq(pdev, 0); > - if (hwmon->irq < 0) { > - dev_err(&pdev->dev, "Failed to get platform irq: %d\n", > - hwmon->irq); > - return hwmon->irq; > - } > - > - hwmon->base = devm_platform_ioremap_resource(pdev, 0); > - if (IS_ERR(hwmon->base)) > - return PTR_ERR(hwmon->base); > - > - hwmon->pdev = pdev; > - init_completion(&hwmon->read_completion); > - mutex_init(&hwmon->lock); > - > - ret = devm_request_irq(dev, hwmon->irq, jz4740_hwmon_irq, 0, > - pdev->name, hwmon); > - if (ret) { > - dev_err(&pdev->dev, "Failed to request irq: %d\n", ret); > - return ret; > - } > - disable_irq(hwmon->irq); > - > - hwmon_dev = devm_hwmon_device_register_with_groups(dev, "jz4740", hwmon, > - jz4740_groups); > - return PTR_ERR_OR_ZERO(hwmon_dev); > -} > - > -static struct platform_driver jz4740_hwmon_driver = { > - .probe = jz4740_hwmon_probe, > - .driver = { > - .name = "jz4740-hwmon", > - }, > -}; > - > -module_platform_driver(jz4740_hwmon_driver); > - > -MODULE_DESCRIPTION("JZ4740 SoC HWMON driver"); > -MODULE_AUTHOR("Lars-Peter Clausen <lars@xxxxxxxxxx>"); > -MODULE_LICENSE("GPL"); > -MODULE_ALIAS("platform:jz4740-hwmon"); > -- > 2.21.0.593.g511ec345e18 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel