Hi Jeffrey.
On Fri, Jul 05, 2019 at 09:56:55AM -0700, Jeffrey Hugo wrote:
> The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> ---
> .../display/panel/sharp,ld-d5116z01b.txt | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
> new file mode 100644
> index 000000000000..3938c2847fe5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
> @@ -0,0 +1,27 @@
> +Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
> +
> +Required properties:
> +- compatible: should be "sharp,ld-d5116z01b"
> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
> +
> +This binding is compatible with the simple-panel binding.
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [1]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + panel: panel {
> + compatible = "sharp,ld-d5116z01b";
> + power-supply = <&vlcd_3v3>;
> + no-hpd
The binding do not mention no-hpd - but it is part of panel-simple
binding. Is it included in the example for any special reason?
Also there is a syntax error, ";" is missing.
Sam
> +
> + port {
> + panel_ep: endpoint {
> + remote-endpoint = <&bridge_out_ep>;
> + };
> + };
> + };
> --
> 2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
