Hi Jeffrey.
Patch looks good, but there is a few fields that are not initialized.
Did you forget them, or are they not needed?
On Fri, Jul 05, 2019 at 09:57:55AM -0700, Jeffrey Hugo wrote:
> The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5a93c4edf1e4..e6f578667324 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2354,6 +2354,29 @@ static const struct panel_desc samsung_ltn140at29_301 = {
> },
> };
>
> +static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
> + .clock = 168480,
> + .hdisplay = 1920,
> + .hsync_start = 1920 + 48,
> + .hsync_end = 1920 + 48 + 32,
> + .htotal = 1920 + 48 + 32 + 80,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 3,
> + .vsync_end = 1280 + 3 + 10,
> + .vtotal = 1280 + 3 + 10 + 57,
> + .vrefresh = 60,
> +};
No .flags? Is it not needed for an eDP panel?
> +
> +static const struct panel_desc sharp_ld_d5116z01b = {
> + .modes = &sharp_ld_d5116z01b_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 260,
> + .height = 120,
> + },
> +};
No .bus_format?
No .bus_flags?
Sam
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
