From: megous@xxxxxxxxxx Date: Thu, 20 Jun 2019 15:47:42 +0200 > From: Ondrej Jirman <megous@xxxxxxxxxx> > > This series implements support for Xunlong Orange Pi 3 board. > > - ethernet support (patches 1-3) > - HDMI support (patches 4-6) > > For some people, ethernet doesn't work after reboot (but works on cold > boot), when the stmmac driver is built into the kernel. It works when > the driver is built as a module. It's either some timing issue, or power > supply issue or a combination of both. Module build induces a power > cycling of the phy. > > I encourage people with this issue, to build the driver into the kernel, > and try to alter the reset timings for the phy in DTS or > startup-delay-us and report the findings. This is a mixture of networking and non-networking changes so it really can't go through my tree. I wonder how you expect this series to be merged? Thanks. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
