Re: [PATCH] drm/imx: correct order of crtc disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-06-20 at 14:32 +0200, Daniel Vetter wrote:
> On Thu, Jun 20, 2019 at 12:12:13PM +0100, Robert Beckett wrote:
> > On Thu, 2019-06-20 at 10:50 +0200, Daniel Vetter wrote:
> > > On Wed, Jun 19, 2019 at 11:40 AM Philipp Zabel <
> > > p.zabel@xxxxxxxxxxxxxx> wrote:
> > > > 
> > > > Hi Robert,
> > > > 
> > > > thank you for the patch.
> > > > 
> > > > On Tue, 2019-06-18 at 16:50 +0100, Robert Beckett wrote:
> > > > > Notify drm core before sending pending events during crtc
> > > > > disable.
> > > > > This fixes the first event after disable having an old stale
> > > > > timestamp
> > > > > by having drm_crtc_vblank_off update the timestamp to now.
> > > > > 
> > > > > This was seen while debugging weston log message:
> > > > > Warning: computed repaint delay is insane: -8212 msec
> > > > > 
> > > > 
> > > > Would you say this
> > > > Fixes: a474478642d5 ("drm/imx: fix crtc vblank state
> > > > regression")
> > > > ?
> > > > 
> > > > > Signed-off-by: Robert Beckett <bob.beckett@xxxxxxxxxxxxx>
> > > > > ---
> > > > >  drivers/gpu/drm/imx/ipuv3-crtc.c | 6 +++---
> > > > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c
> > > > > b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > > > > index 9cc1d678674f..c436a28d50e4 100644
> > > > > --- a/drivers/gpu/drm/imx/ipuv3-crtc.c
> > > > > +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > > > > @@ -91,14 +91,14 @@ static void
> > > > > ipu_crtc_atomic_disable(struct
> > > > > drm_crtc *crtc,
> > > > >       ipu_dc_disable(ipu);
> > > > >       ipu_prg_disable(ipu);
> > > > > 
> > > > > +     drm_crtc_vblank_off(crtc);
> > > > > +
> > > > 
> > > > This is explained in the commit message and aligns with the
> > > > drm_crtc_state @event documentation.
> > > 
> > > This part here looks fishy. The drm_vblank.c code is supposed to
> > > do
> > > the right thing, no matter where or when you ask it to generate
> > > an
> > > event. It definitely shouldn't generate a timestamp that's a few
> > > seconds too early. Bunch of options:
> > > - there's a bug in drm_vblank.c and it's mixing up something and
> > > generating a totally bogus value.
> > > - there's a lie in your imx vblank code, which trips the
> > > drm_vblank.c
> > > counter interpolation and results in a totally bogus value.
> > > 
> > > drm_vblank.c assumes that if you do claim to have a hw counter
> > > and
> > > generate timestamps, that those are perfectly accurate. It only
> > > falls
> > > back to guestimating using the system timer if that's not
> > > present.
> > > 
> > > Either way, this very much smells like papering over a bug if
> > > this
> > > change indeed fixes your wrong vblank timestamps.
> > > 
> > 
> > A quick explaination of where the dodgy timestamp came from:
> > 1. driver starts up
> > 2. fbcon comes along and restores fbdev, enabling vblank
> > 3. vblank_disable_fn fires via timer disabling vblank, keeping
> > vblank
> > seq number and time set at current value
> > (some time later)
> > 4. weston starts and does a modeset
> > 5. atomic commit disables crtc while it does the modeset
> > 6. ipu_crtc_atomic_disable sends vblank with old seq number and
> > time
> > 
> > It turns out the actual fix for the old vblank is the next change,
> > which stops it being sent at all during the crtc disable as it is
> > is
> > still active, it would then go through drm_crtc_vblank_off,
> > reseting
> > the timestamp, and get delivered during the vblank enable as part
> > of
> > the atomic commit.
> 
> This shouldn't fix your vblank timestamp troubles either. It might
> mean
> that the timestamp is slightly too early (because you take it while
> shutting down the crtc, not while re-enabling), but not by seconds.
> 
> Quick experiment: Disable vblank disabling with drm.vblankoffdelay =
> 0. If
> that also fixes the timestamps, then I'm pretty sure you have a
> driver bug
> somewhere and lie to the vblank core code about something.
> -Daniel
> 

Experiment done. The timestamp is fine, it is the timestamp of the
previous vblank update. But, this would fix it because the vblank
interrupt was never disabled.

The original issue was that the event got sent after vblank was
disabled and before it got re-enabled during the modeset, so nothing
had happened to update the timestamp and seq number.

What are you expecting to update the timestamp and seq number while the
interrupt is disabled after vblank_disable_fn?

Im struggling to see what this experiment was meant to test/prove.

> > 
> > So, in theory, we could just have the following change to fix the
> > specific issue of a stale timestamp.
> > 
> > However, given the documentation for the event in
> > include/drm/drm_crtc.h:
> > 
> >          *  - The event is for a CRTC which is being disabled
> > through
> > this
> >          *    atomic commit. In that case the event can be send out
> > any
> > time
> >          *    after the hardware has stopped scanning out the
> > current
> >          *    framebuffers. It should contain the timestamp and
> > counter
> > for the
> >          *    last vblank before the display pipeline was shut off.
> > The
> > simplest
> >          *    way to achieve that is calling
> > drm_crtc_send_vblank_event()
> >          *    somewhen after drm_crtc_vblank_off() has been called.
> > 
> > This still seems like a sensible change for when the crtc is being
> > disabled.
> > 
> > 
> > 
> > > > >       spin_lock_irq(&crtc->dev->event_lock);
> > > > > -     if (crtc->state->event)
> > > > > {
> > > > > +     if (crtc->state->event && !crtc->state->active) {
> > > > 
> > > > This is not mentioned though.
> > > > 
> > > > If the pending event is not sent here, I assume it will be
> > > > picked
> > > > up by
> > > > .atomic_flush and will then be sent after the first EOF
> > > > interrupt
> > > > after
> > > > the modeset is complete. Can you explain this in the commit
> > > > message?
> > > 
> > > Yeah looks correct (you only want to generate the event here when
> > > the
> > > crtc stays off), if it gets re-enabled the event should only be
> > > generated later on once that's all finished. But separate bugfix.
> > > -Daniel
> > > 
> > 
> > It looks like this is actually the fix needed to avoid the bogus
> > timestamp.
> > 
> > I can split this patch up in to 2 commits if desired?
> > 
> > > > 
> > > > With that,
> > > > Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> > > > 
> > > > >               drm_crtc_send_vblank_event(crtc, crtc->state-
> > > > > > event);
> > > > > 
> > > > >               crtc->state->event = NULL;
> > > > >       }
> > > > >       spin_unlock_irq(&crtc->dev->event_lock);
> > > > > -
> > > > > -     drm_crtc_vblank_off(crtc);
> > > > >  }
> > > > > 
> > > > >  static void imx_drm_crtc_reset(struct drm_crtc *crtc)
> > > > 
> > > > regards
> > > > Philipp
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > 
> > > 
> > > 
> 
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux