On 16/05/2019 12:19, Robin Murphy wrote:
[...]
> I was expecting to see a similar behaviour to my T620 (which I now
> assume was down to 64-bit job descriptors sort-of-but-not-quite working)
> but this does look a bit more fundamental - the fact that it's a level 1
> fault with VA == head == tail suggests to me that the MMU can't see the
> page tables at all to translate anything. I really hope that the H6 GPU
> integration doesn't suffer from the same DMA offset as the Allwinner
> display pipeline stuff, because that would be a real pain to support in
> io-pgtable.
Assuming you mean the case where the physical address (as seen by the
CPU) is different from the dma address (as seen by the GPU), then I
highly doubt it because mali_kbase doesn't support it:
[from kbase_mem_pool_alloc_page() in mali_kbase_mem_pool.c]:
dma_addr = dma_map_page(dev, p, 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, dma_addr)) {
__free_page(p);
return NULL;
}
WARN_ON(dma_addr != page_to_phys(p));
That being said it's quite possible there could be something in the bus
which needs configuring to make this work - in which case your best bet
is to look at the vendor kernel and see if anything extra is poked when
the Mali driver is loaded.
Steve
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
