Hi,
On Mon, 2019-02-11 at 15:41 +0100, Maxime Ripard wrote:
> From: Konstantin Sudakov <k.sudakov@xxxxxxxxxxxxxxxxxx>
>
> The Ronbo RB070D30 panel is a MIPI-DSI panel based on a Fitipower EK79007
> controller and a 1024x600 panel.
>
> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Signed-off-by: Konstantin Sudakov <k.sudakov@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +-
> drivers/gpu/drm/panel/Makefile | 1 +-
> drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 262 ++++++++++++++++++++-
Looks like no bindings documentation is introduced for this panel.
Shouldn't that be the case? The vendor also seems to be missing from
vendor-prefixes.txt.
For the driver itself:
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
Cheers,
Paul
> 3 files changed, 272 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 3f3537719beb..870dcdbf2601 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -138,6 +138,15 @@ config DRM_PANEL_RAYDIUM_RM68200
> Say Y here if you want to enable support for Raydium RM68200
> 720x1280 DSI video mode panel.
>
> +config DRM_PANEL_RONBO_RB070D30
> + tristate "Ronbo Electronics RB070D30 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Ronbo Electronics
> + RB070D30 1024x600 DSI panel.
> +
> config DRM_PANEL_SAMSUNG_S6D16D0
> tristate "Samsung S6D16D0 DSI video mode panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 4396658a7996..4a103d346809 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
> obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
> obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
> obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
> +obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
> new file mode 100644
> index 000000000000..cb4f99252aa0
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
> @@ -0,0 +1,262 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018-2019, Bridge Systems BV
> + * Copyright (C) 2018-2019, Bootlin
> + * Copyright (C) 2017, Free Electrons
> + *
> + * This file based on panel-ilitek-ili9881c.c
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/fb.h>
> +#include <linux/kernel.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_display_timing.h>
> +#include <video/videomode.h>
> +
> +struct rb070d30_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct backlight_device *backlight;
> + struct regulator *supply;
> +
> + struct {
> + struct gpio_desc *power;
> + struct gpio_desc *reset;
> + struct gpio_desc *updn;
> + struct gpio_desc *shlr;
> + } gpios;
> +};
> +
> +static inline struct rb070d30_panel *panel_to_rb070d30_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct rb070d30_panel, panel);
> +}
> +
> +static int rb070d30_panel_prepare(struct drm_panel *panel)
> +{
> + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel);
> + int ret;
> +
> + ret = regulator_enable(ctx->supply);
> + if (ret < 0) {
> + DRM_DEV_ERROR(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret);
> + return ret;
> + }
> +
> + /* Reset */
> + msleep(20);
> + gpiod_set_value(ctx->gpios.power, 1);
> + msleep(20);
> + gpiod_set_value(ctx->gpios.reset, 1);
> + msleep(20);
> + return 0;
> +}
> +
> +static int rb070d30_panel_unprepare(struct drm_panel *panel)
> +{
> + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel);
> +
> + gpiod_set_value(ctx->gpios.reset, 0);
> + gpiod_set_value(ctx->gpios.power, 0);
> + regulator_disable(ctx->supply);
> +
> + return 0;
> +}
> +
> +static int rb070d30_panel_enable(struct drm_panel *panel)
> +{
> + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel);
> + int ret;
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi);
> + if (ret)
> + return ret;
> +
> + ret = backlight_enable(ctx->backlight);
> + if (ret)
> + goto out;
> +
> + return 0;
> +
> +out:
> + mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
> + return ret;
> +}
> +
> +static int rb070d30_panel_disable(struct drm_panel *panel)
> +{
> + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel);
> +
> + backlight_disable(ctx->backlight);
> + return mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
> +}
> +
> +/* Default timings */
> +static const struct drm_display_mode default_mode = {
> + .clock = 51206,
> + .hdisplay = 1024,
> + .hsync_start = 1024 + 160,
> + .hsync_end = 1024 + 160 + 80,
> + .htotal = 1024 + 160 + 80 + 80,
> + .vdisplay = 600,
> + .vsync_start = 600 + 12,
> + .vsync_end = 600 + 12 + 10,
> + .vtotal = 600 + 12 + 10 + 13,
> + .vrefresh = 60,
> +
> + .width_mm = 154,
> + .height_mm = 85,
> +};
> +
> +static int rb070d30_panel_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel);
> + struct drm_display_mode *mode;
> + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + DRM_DEV_ERROR(&ctx->dsi->dev,
> + "Failed to add mode " DRM_MODE_FMT "\n",
> + DRM_MODE_ARG(&default_mode));
> + return -EINVAL;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> +
> + panel->connector->display_info.bpc = 8;
> + panel->connector->display_info.width_mm = mode->width_mm;
> + panel->connector->display_info.height_mm = mode->height_mm;
> + drm_display_info_set_bus_formats(&connector->display_info,
> + &bus_format, 1);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs rb070d30_panel_funcs = {
> + .get_modes = rb070d30_panel_get_modes,
> + .prepare = rb070d30_panel_prepare,
> + .enable = rb070d30_panel_enable,
> + .disable = rb070d30_panel_disable,
> + .unprepare = rb070d30_panel_unprepare,
> +};
> +
> +static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi)
> +{
> + struct rb070d30_panel *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->supply = devm_regulator_get(&dsi->dev, "vcc-lcd");
> + if (IS_ERR(ctx->supply))
> + return PTR_ERR(ctx->supply);
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> + ctx->dsi = dsi;
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = &dsi->dev;
> + ctx->panel.funcs = &rb070d30_panel_funcs;
> +
> + ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->gpios.reset)) {
> + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
> + return PTR_ERR(ctx->gpios.reset);
> + }
> +
> + ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->gpios.power)) {
> + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our power GPIO\n");
> + return PTR_ERR(ctx->gpios.power);
> + }
> +
> + /*
> + * We don't change the state of that GPIO later on but we need
> + * to force it into a low state.
> + */
> + ctx->gpios.updn = devm_gpiod_get(&dsi->dev, "updn", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->gpios.updn)) {
> + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our updn GPIO\n");
> + return PTR_ERR(ctx->gpios.updn);
> + }
> +
> + /*
> + * We don't change the state of that GPIO later on but we need
> + * to force it into a low state.
> + */
> + ctx->gpios.shlr = devm_gpiod_get(&dsi->dev, "shlr", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->gpios.shlr)) {
> + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our shlr GPIO\n");
> + return PTR_ERR(ctx->gpios.shlr);
> + }
> +
> + ctx->backlight = devm_of_find_backlight(&dsi->dev);
> + if (IS_ERR(ctx->backlight)) {
> + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our backlight\n");
> + return PTR_ERR(ctx->backlight);
> + }
> +
> + ret = drm_panel_add(&ctx->panel);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->lanes = 4;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int rb070d30_panel_dsi_remove(struct mipi_dsi_device *dsi)
> +{
> + struct rb070d30_panel *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rb070d30_panel_of_match[] = {
> + { .compatible = "ronbo,rb070d30" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, rb070d30_panel_of_match);
> +
> +static struct mipi_dsi_driver rb070d30_panel_driver = {
> + .probe = rb070d30_panel_dsi_probe,
> + .remove = rb070d30_panel_dsi_remove,
> + .driver = {
> + .name = "panel-ronbo-rb070d30",
> + .of_match_table = rb070d30_panel_of_match,
> + },
> +};
> +module_mipi_dsi_driver(rb070d30_panel_driver);
> +
> +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@xxxxxxxxxxx>");
> +MODULE_AUTHOR("Konstantin Sudakov <k.sudakov@xxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Ronbo RB070D30 Panel Driver");
> +MODULE_LICENSE("GPL");
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
