RE: [PATCH v12 24/38] misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> On 2/9/2019 9:39 PM, Winkler, Tomas wrote:
> >> Request ME FW to start the HDCP2.2 session for an intel port.
> >> Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and
> sends
> >> to ME FW.
> >>
> >> On Success, ME FW will start a HDCP2.2 session for the port and
> >> provides the content for HDCP2.2 AKE_Init message.
> >>
> >> v2: Rebased.
> >> v3:
> >>    cldev is add as a separate parameter [Tomas]
> >>    Redundant comment and typecast are removed [Tomas]
> >> v4:
> >>    %zd is used for size [Alexander]
> >>    %s/return -1/return -EIO [Alexander]
> >>    Spellings in commit msg is fixed [Uma]
> >> v5: Rebased.
> >> v6:
> >>    Collected the rb-ed by.
> >>    Realigning the patches in the series.
> >> v7:
> >>    Adjust to the new mei interface.
> >>    Fix for kdoc.
> >> v8:
> >>    K-Doc Addition.
> >>    memcpy for const length.
> >> v9:
> >>    s/mei_hdcp_ddi/mei_fw_ddi
> >>    s/i915_port/mei_i915_port [Tomas]
> >>    renamed func as mei_hdcp_* [Tomas]
> >>    Instead of macro, inline func for ddi index is used. [Tomas]
> >>
> >> Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> >> Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> >> Acked-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
> >> ---
> >>   drivers/misc/mei/hdcp/mei_hdcp.c | 89
> >> ++++++++++++++++++++++++++++++++++++++++
> >>   drivers/misc/mei/hdcp/mei_hdcp.h | 23 +++++++++++
> >>   2 files changed, 112 insertions(+)
> >>
> >> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> >> b/drivers/misc/mei/hdcp/mei_hdcp.c
> >> index 8df069c1b0cc..56d3ac1e6831 100644
> >> --- a/drivers/misc/mei/hdcp/mei_hdcp.c
> >> +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> >> @@ -23,6 +23,95 @@
> >>   #include <linux/slab.h>
> >>   #include <linux/uuid.h>
> >>   #include <linux/mei_cl_bus.h>
> >> +#include <drm/drm_connector.h>
> >> +#include <drm/i915_component.h>
> >> +#include <drm/i915_mei_hdcp_interface.h>
> >> +
> >> +#include "mei_hdcp.h"
> >> +
> >> +static inline u8 mei_get_ddi_index(short int port) {
> >> +	enum mei_i915_port i915_port = (enum mei_i915_port)port;
> >> +
> >> +	return (u8)(i915_port == PORT_A ? MEI_DDI_A : i915_port); }
> >> +
> > Still the same code I haven't Acked that patch.
> Sorry. I will remove the ack part.
> 
> I prefer this approach as it is not so complicated stuff here. still if you insist I
> will use switch case.
Yes, I believe that the translation should be understood. 
This function should returns 
   MEI_DDI_XXX only (it could be u8)
It's by accident  that MEI_DDI_B equals PORT_B etc. 
Please also remove dual enum i915_port and eum port  as well. 
Thanks
Tomas

> 
> Thanks
> --Ram
> 
> > Thanks
> > Tomas
> >
> >
> >> +/**
> >> + * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session
> >> +in ME FW
> >> + * @dev: device corresponding to the mei_cl_device
> >> + * @hdcp_data: Intel HW specific hdcp data
> >> + * @ake_data: AKE_Init msg output.
> >> + *
> >> + * Return:  0 on Success, <0 on Failure.
> >> + */
> >> +static int
> >> +mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data
> *data,
> >> +			  struct hdcp2_ake_init *ake_data) {
> >> +	struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
> >> +	struct wired_cmd_initiate_hdcp2_session_out
> >> +						session_init_out = { { 0 } };
> >> +	struct mei_cl_device *cldev;
> >> +	ssize_t byte;
> >> +
> >> +	if (!dev || !data || !ake_data)
> >> +		return -EINVAL;
> >> +
> >> +	cldev = to_mei_cl_device(dev);
> >> +
> >> +	session_init_in.header.api_version = HDCP_API_VERSION;
> >> +	session_init_in.header.command_id =
> >> WIRED_INITIATE_HDCP2_SESSION;
> >> +	session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
> >> +	session_init_in.header.buffer_len =
> >> +
> >> 	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
> >> +
> >> +	session_init_in.port.integrated_port_type = data->port_type;
> >> +	session_init_in.port.physical_port = mei_get_ddi_index(data->port);
> >> +	session_init_in.protocol = data->protocol;
> >> +
> >> +	byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
> >> +			      sizeof(session_init_in));
> >> +	if (byte < 0) {
> >> +		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
> >> +		return byte;
> >> +	}
> >> +
> >> +	byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
> >> +			      sizeof(session_init_out));
> >> +	if (byte < 0) {
> >> +		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
> >> +		return byte;
> >> +	}
> >> +
> >> +	if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
> >> +		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
> >> +			WIRED_INITIATE_HDCP2_SESSION,
> >> +			session_init_out.header.status);
> >> +		return -EIO;
> >> +	}
> >> +
> >> +	ake_data->msg_id = HDCP_2_2_AKE_INIT;
> >> +	ake_data->tx_caps = session_init_out.tx_caps;
> >> +	memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static __attribute__((unused))
> >> +struct i915_hdcp_component_ops mei_hdcp_ops = {
> >> +	.owner = THIS_MODULE,
> >> +	.initiate_hdcp2_session = mei_hdcp_initiate_session,
> >> +	.verify_receiver_cert_prepare_km = NULL,
> >> +	.verify_hprime = NULL,
> >> +	.store_pairing_info = NULL,
> >> +	.initiate_locality_check = NULL,
> >> +	.verify_lprime = NULL,
> >> +	.get_session_key = NULL,
> >> +	.repeater_check_flow_prepare_ack = NULL,
> >> +	.verify_mprime = NULL,
> >> +	.enable_hdcp_authentication = NULL,
> >> +	.close_hdcp_session = NULL,
> >> +};
> >>
> >>   static int mei_hdcp_probe(struct mei_cl_device *cldev,
> >>   			  const struct mei_cl_device_id *id) diff --git
> >> a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
> >> index 582a7e27ae29..28686f2ae88c 100644
> >> --- a/drivers/misc/mei/hdcp/mei_hdcp.h
> >> +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> >> @@ -363,4 +363,27 @@ struct wired_cmd_repeater_auth_stream_req_out
> {
> >>   	struct hdcp_port_id	port;
> >>   } __packed;
> >>
> >> +enum mei_fw_ddi {
> >> +	MEI_DDI_INVALID_PORT = 0x0,
> >> +
> >> +	MEI_DDI_B = 1,
> >> +	MEI_DDI_C,
> >> +	MEI_DDI_D,
> >> +	MEI_DDI_E,
> >> +	MEI_DDI_F,
> >> +	MEI_DDI_A = 7,
> >> +	MEI_DDI_RANGE_END = MEI_DDI_A,
> >> +};
> >> +
> >> +enum mei_i915_port {
> >> +	PORT_NONE = -1,
> >> +
> >> +	PORT_A = 0,
> >> +	PORT_B,
> >> +	PORT_C,
> >> +	PORT_D,
> >> +	PORT_E,
> >> +	PORT_F,
> >> +	I915_MAX_PORTS,
> >> +};
> >>   #endif /* __MEI_HDCP_H__ */
> >> --
> >> 2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux