RE: [PATCH v12 24/38] misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Request ME FW to start the HDCP2.2 session for an intel port.
> Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends
> to ME FW.
> 
> On Success, ME FW will start a HDCP2.2 session for the port and provides the
> content for HDCP2.2 AKE_Init message.
> 
> v2: Rebased.
> v3:
>   cldev is add as a separate parameter [Tomas]
>   Redundant comment and typecast are removed [Tomas]
> v4:
>   %zd is used for size [Alexander]
>   %s/return -1/return -EIO [Alexander]
>   Spellings in commit msg is fixed [Uma]
> v5: Rebased.
> v6:
>   Collected the rb-ed by.
>   Realigning the patches in the series.
> v7:
>   Adjust to the new mei interface.
>   Fix for kdoc.
> v8:
>   K-Doc Addition.
>   memcpy for const length.
> v9:
>   s/mei_hdcp_ddi/mei_fw_ddi
>   s/i915_port/mei_i915_port [Tomas]
>   renamed func as mei_hdcp_* [Tomas]
>   Instead of macro, inline func for ddi index is used. [Tomas]
> 
> Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> Acked-by: Tomas Winkler <tomas.winkler@xxxxxxxxx>
> ---
>  drivers/misc/mei/hdcp/mei_hdcp.c | 89
> ++++++++++++++++++++++++++++++++++++++++
>  drivers/misc/mei/hdcp/mei_hdcp.h | 23 +++++++++++
>  2 files changed, 112 insertions(+)
> 
> diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> b/drivers/misc/mei/hdcp/mei_hdcp.c
> index 8df069c1b0cc..56d3ac1e6831 100644
> --- a/drivers/misc/mei/hdcp/mei_hdcp.c
> +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> @@ -23,6 +23,95 @@
>  #include <linux/slab.h>
>  #include <linux/uuid.h>
>  #include <linux/mei_cl_bus.h>
> +#include <drm/drm_connector.h>
> +#include <drm/i915_component.h>
> +#include <drm/i915_mei_hdcp_interface.h>
> +
> +#include "mei_hdcp.h"
> +
> +static inline u8 mei_get_ddi_index(short int port) {
> +	enum mei_i915_port i915_port = (enum mei_i915_port)port;
> +
> +	return (u8)(i915_port == PORT_A ? MEI_DDI_A : i915_port); }
> +
Still the same code I haven't Acked that patch.
Thanks
Tomas


> +/**
> + * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in
> +ME FW
> + * @dev: device corresponding to the mei_cl_device
> + * @hdcp_data: Intel HW specific hdcp data
> + * @ake_data: AKE_Init msg output.
> + *
> + * Return:  0 on Success, <0 on Failure.
> + */
> +static int
> +mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
> +			  struct hdcp2_ake_init *ake_data)
> +{
> +	struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
> +	struct wired_cmd_initiate_hdcp2_session_out
> +						session_init_out = { { 0 } };
> +	struct mei_cl_device *cldev;
> +	ssize_t byte;
> +
> +	if (!dev || !data || !ake_data)
> +		return -EINVAL;
> +
> +	cldev = to_mei_cl_device(dev);
> +
> +	session_init_in.header.api_version = HDCP_API_VERSION;
> +	session_init_in.header.command_id =
> WIRED_INITIATE_HDCP2_SESSION;
> +	session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
> +	session_init_in.header.buffer_len =
> +
> 	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
> +
> +	session_init_in.port.integrated_port_type = data->port_type;
> +	session_init_in.port.physical_port = mei_get_ddi_index(data->port);
> +	session_init_in.protocol = data->protocol;
> +
> +	byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
> +			      sizeof(session_init_in));
> +	if (byte < 0) {
> +		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
> +		return byte;
> +	}
> +
> +	byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
> +			      sizeof(session_init_out));
> +	if (byte < 0) {
> +		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
> +		return byte;
> +	}
> +
> +	if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
> +		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
> +			WIRED_INITIATE_HDCP2_SESSION,
> +			session_init_out.header.status);
> +		return -EIO;
> +	}
> +
> +	ake_data->msg_id = HDCP_2_2_AKE_INIT;
> +	ake_data->tx_caps = session_init_out.tx_caps;
> +	memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
> +
> +	return 0;
> +}
> +
> +static __attribute__((unused))
> +struct i915_hdcp_component_ops mei_hdcp_ops = {
> +	.owner = THIS_MODULE,
> +	.initiate_hdcp2_session = mei_hdcp_initiate_session,
> +	.verify_receiver_cert_prepare_km = NULL,
> +	.verify_hprime = NULL,
> +	.store_pairing_info = NULL,
> +	.initiate_locality_check = NULL,
> +	.verify_lprime = NULL,
> +	.get_session_key = NULL,
> +	.repeater_check_flow_prepare_ack = NULL,
> +	.verify_mprime = NULL,
> +	.enable_hdcp_authentication = NULL,
> +	.close_hdcp_session = NULL,
> +};
> 
>  static int mei_hdcp_probe(struct mei_cl_device *cldev,
>  			  const struct mei_cl_device_id *id) diff --git
> a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
> index 582a7e27ae29..28686f2ae88c 100644
> --- a/drivers/misc/mei/hdcp/mei_hdcp.h
> +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> @@ -363,4 +363,27 @@ struct wired_cmd_repeater_auth_stream_req_out {
>  	struct hdcp_port_id	port;
>  } __packed;
> 
> +enum mei_fw_ddi {
> +	MEI_DDI_INVALID_PORT = 0x0,
> +
> +	MEI_DDI_B = 1,
> +	MEI_DDI_C,
> +	MEI_DDI_D,
> +	MEI_DDI_E,
> +	MEI_DDI_F,
> +	MEI_DDI_A = 7,
> +	MEI_DDI_RANGE_END = MEI_DDI_A,
> +};
> +
> +enum mei_i915_port {
> +	PORT_NONE = -1,
> +
> +	PORT_A = 0,
> +	PORT_B,
> +	PORT_C,
> +	PORT_D,
> +	PORT_E,
> +	PORT_F,
> +	I915_MAX_PORTS,
> +};
>  #endif /* __MEI_HDCP_H__ */
> --
> 2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux