[PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Minimum PLL used for MIPI is 500MHz, as per manual, but
lowering the min rate by 300MHz can result proper working
nkms divider with the help of desired dclock rate from
panel driver.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 932836d26e2b..296d489aad6e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -183,6 +183,7 @@ static struct ccu_nkm pll_mipi_clk = {
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
 	.m		= _SUNXI_CCU_DIV(0, 4),
+	.min_rate	= 300000000,
 	.common		= {
 		.reg		= 0x040,
 		.hw.init	= CLK_HW_INIT("pll-mipi", "pll-video0",
-- 
2.18.0.321.gffc6fa0e3

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux