Hi Maxime,
On Wed, Jan 09, 2019 at 10:33:24AM +0100, Maxime Ripard wrote:
> The Cadence D-PHY bindings was defined as part of the DSI block so far.
> However, since it's now going to be a separate driver, we need to move the
> binding to a file of its own.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Could you also send this to the devicetree list, please?
> ---
> Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt | 21 +-------
> Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 +++++++-
> 2 files changed, 20 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> index f5725bb6c61c..525a4bfd8634 100644
> --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> @@ -31,28 +31,7 @@ Required subnodes:
> - one subnode per DSI device connected on the DSI bus. Each DSI device should
> contain a reg property encoding its virtual channel.
>
> -Cadence DPHY
> -============
> -
> -Cadence DPHY block.
> -
> -Required properties:
> -- compatible: should be set to "cdns,dphy".
> -- reg: physical base address and length of the DPHY registers.
> -- clocks: DPHY reference clocks.
> -- clock-names: must contain "psm" and "pll_ref".
> -- #phy-cells: must be set to 0.
> -
> -
> Example:
> - dphy0: dphy@fd0e0000{
> - compatible = "cdns,dphy";
> - reg = <0x0 0xfd0e0000 0x0 0x1000>;
> - clocks = <&psm_clk>, <&pll_ref_clk>;
> - clock-names = "psm", "pll_ref";
> - #phy-cells = <0>;
> - };
> -
> dsi0: dsi@fd0c0000 {
> compatible = "cdns,dsi";
> reg = <0x0 0xfd0c0000 0x0 0x1000>;
> diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
> new file mode 100644
> index 000000000000..1095bc4e72d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
> @@ -0,0 +1,20 @@
> +Cadence DPHY
> +============
> +
> +Cadence DPHY block.
> +
> +Required properties:
> +- compatible: should be set to "cdns,dphy".
> +- reg: physical base address and length of the DPHY registers.
> +- clocks: DPHY reference clocks.
> +- clock-names: must contain "psm" and "pll_ref".
> +- #phy-cells: must be set to 0.
> +
> +Example:
> + dphy0: dphy@fd0e0000{
> + compatible = "cdns,dphy";
> + reg = <0x0 0xfd0e0000 0x0 0x1000>;
> + clocks = <&psm_clk>, <&pll_ref_clk>;
> + clock-names = "psm", "pll_ref";
> + #phy-cells = <0>;
> + };
> --
> git-series 0.9.1
--
Sakari Ailus
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
