On Wed, Jan 09, 2019 at 10:33:17AM +0100, Maxime Ripard wrote: > Hi, > > Here is a set of patches to allow the phy framework consumers to test and > apply runtime configurations. > > This is needed to support more phy classes that require tuning based on > parameters depending on the current use case of the device, in addition to > the power state management already provided by the current functions. > > A first test bed for that API are the MIPI D-PHY devices. There's a number > of solutions that have been used so far to support these phy, most of the > time being an ad-hoc driver in the consumer. > > That approach has a big shortcoming though, which is that this is quite > difficult to deal with consumers integrated with multiple variants of phy, > of multiple consumers integrated with the same phy. > > The latter case can be found in the Cadence DSI bridge, and the CSI > transceiver and receivers. All of them are integrated with the same phy, or > can be integrated with different phy, depending on the implementation. > > I've looked at all the MIPI DSI drivers I could find, and gathered all the > parameters I could find. The interface should be complete, and most of the > drivers can be converted in the future. The current set converts two of > them: the above mentionned Cadence DSI driver so that the v4l2 drivers can > use them, and the Allwinner MIPI-DSI driver. > > Let me know what you think, > Maxime > > Changes from v3 > - Rebased on 5.0-rc1 > - Added the fixes suggested by Sakari Thanks! For patches 1--3: Acked-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> -- Sakari Ailus _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
