On 06/12/18 22:26, Laurent Pinchart wrote: > Hello, > > This small patch series improves the ti-tfp410 driver with three new features, > in patch 2/5 to 5/5. Patch 1/5 has been previously posted by Stefan, and I've > included it here to support patch 5/5 that needs to store other polarity > information in the bridge timings than the sampling edges. > > These changes are meant to support the missing tfp410 features currently > implemented in the omapdrm custom tfp410 driver, in order to move to > drm_bridge. > > The series is based on top of the "[PATCH v2 0/2] Clarify display info PIXDATA > bus flags" series [1] previously posted on the mailing list. > > [1] https://lists.freedesktop.org/archives/dri-devel/2018-December/199204.html > > Laurent Pinchart (4): > dt-bindings: display: tfp410: Add bus parameters properties > drm/bridge: ti-tfp410: Set connector type based on DT connector node > drm/bridge: ti-tfp410: Add support for the powerdown GPIO > drm/bridge: ti-tfp410: Report input bus config through bridge timings > > Stefan Agner (1): > drm/bridge: use bus flags in bridge timings > > .../bindings/display/bridge/ti,tfp410.txt | 24 +++- > drivers/gpu/drm/bridge/dumb-vga-dac.c | 6 +- > drivers/gpu/drm/bridge/ti-tfp410.c | 109 +++++++++++++++++- > include/drm/drm_bridge.h | 12 +- > 4 files changed, 131 insertions(+), 20 deletions(-) For the series: Reviewed-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
