Hello, This small patch series improves the ti-tfp410 driver with three new features, in patch 2/5 to 5/5. Patch 1/5 has been previously posted by Stefan, and I've included it here to support patch 5/5 that needs to store other polarity information in the bridge timings than the sampling edges. These changes are meant to support the missing tfp410 features currently implemented in the omapdrm custom tfp410 driver, in order to move to drm_bridge. The series is based on top of the "[PATCH v2 0/2] Clarify display info PIXDATA bus flags" series [1] previously posted on the mailing list. [1] https://lists.freedesktop.org/archives/dri-devel/2018-December/199204.html Laurent Pinchart (4): dt-bindings: display: tfp410: Add bus parameters properties drm/bridge: ti-tfp410: Set connector type based on DT connector node drm/bridge: ti-tfp410: Add support for the powerdown GPIO drm/bridge: ti-tfp410: Report input bus config through bridge timings Stefan Agner (1): drm/bridge: use bus flags in bridge timings .../bindings/display/bridge/ti,tfp410.txt | 24 +++- drivers/gpu/drm/bridge/dumb-vga-dac.c | 6 +- drivers/gpu/drm/bridge/ti-tfp410.c | 109 +++++++++++++++++- include/drm/drm_bridge.h | 12 +- 4 files changed, 131 insertions(+), 20 deletions(-) -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
