Instruction loop selection would require before writing
loop number registers, so enable idle, LP11 bits on
loop selection register.
Reference code available in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
(dsi_dev[sel]->dsi_inst_loop_sel.dwval = 2<<(4*DSI_INST_ID_LP11) |
3<<(4*DSI_INST_ID_DLY);
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 43ab7127d428..3ac002c4d8b3 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -438,6 +438,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
{
u16 delay = sun6i_dsi_setup_inst_delay(dsi, mode);
+ regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
+ DSI_INST_ID_HSC << (4 * DSI_INST_ID_LP11) |
+ DSI_INST_ID_HSD << (4 * DSI_INST_ID_DLY));
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0),
SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
SUN6I_DSI_INST_LOOP_NUM_N1(delay));
--
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
