This series support MIPI-DSI Burst mode on Allwinner platform, which is tested in burst supported panel in Pine64-LTS board. Series fixed few code changes commented in previous version[1] and it depends on A64 MIPI-DSI series[2] Changes for v2: - add separate function for setup_inst_delay computation - moved instruction loop seletion below delay compuation - add separate function for dsi_get_timings and call for non-burst mode - simplify burst mode timings compuatation - add new patches, for tcon0 probing during dsi_bind - add code to get the tcon0 divider value - add multiple functions to get line_num, edge0, edge1 - squash 'enable burst mode' patch into 'Setup burst mode' - fixed commit message of 'Enable burst mode HBP, HSA_HSE' s/enable/disable - collect Rob R-b tag on panel dt-bindings patch - panel driver changes, - dropped unneeded include files - s/fy07024di26a30d/feiyang function, variable names - use DRM_DEV_ERROR in panel driver - add set_display_on .enable - moved regulator enablement to .prepare - handle erro statements and release them properly during probe - remove panel if mipi_dsi_attach failed - fixed MODULE_LICENSE - update MAINTAINERS file about the panel - add comments on dts about exact regulators used in schematics [1] https://patchwork.kernel.org/cover/10666597/ [2] https://patchwork.kernel.org/cover/10680247/ Any inputs, Jagan. Jagan Teki (12): drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings drm/sun4i: sun6i_mipi_dsi: Simplify drq set to support all modes drm/sun4i: tcon: Export get tcon0 routine drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind drm/sun4i: sun6i_mipi_dsi: Setup burst mode drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane burst mode drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel [DO NOT MERGE] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel .../display/panel/feiyang,fy07024di26a30d.txt | 20 ++ MAINTAINERS | 6 + .../dts/allwinner/sun50i-a64-pine64-lts.dts | 37 +++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-feiyang-fy07024di26a30d.c | 286 ++++++++++++++++++ drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 +- drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 264 ++++++++++++---- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 1 + 10 files changed, 567 insertions(+), 61 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c -- 2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
