On 29/10/18 2:28 PM, Maxime Ripard wrote:
On Thu, Oct 25, 2018 at 04:25:59PM +0530, Jagan Teki wrote:
On Wed, Oct 24, 2018 at 11:34 PM Maxime Ripard
<maxime.ripard@xxxxxxxxxxx> wrote:
On Tue, Oct 23, 2018 at 09:20:22PM +0530, Jagan Teki wrote:
Some NKM PLLs doesn't work well when their output clock rate is set below
certain rate.
So, add support for minimal rate for relevant PLLs.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v2:
- new patch
drivers/clk/sunxi-ng/ccu_nkm.c | 7 +++++++
drivers/clk/sunxi-ng/ccu_nkm.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index 841840e35e61..d17539dc88dd 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -125,6 +125,13 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= nkm->fixed_post_div;
+ if (rate < nkm->min_rate) {
+ rate = nkm->min_rate;
+ if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nkm->fixed_post_div;
I'm not sure this is right. Is the post divider taken into account to
calculate the minimum, or is the minimum on the rate before the fixed
post divider.
Since we are returning from here, we need to take care post div which
is actually doing at the end of round_rate.
That's not my point though. Does the rate needs to be superior to min
/ post_div, or min?
ie what I'm trying to say, since it's common code min or max should /
post_div and PLL_MIPI doesn't use any post_div.
We need to take care post_div though the current test (PLL_MIPI) in not
used since it's common code. just like nkmp, nm etc.
How did you test this?
I've not used this on PLL_MIPI atleast, so I didn't test this.
If you've never tested this, why are you adding that code?
Like above, it's common code. otherwise might effect.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
