On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > > On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote: > > According to horizontal and vertical timings are defined > > per the diagram from include/drm/drm_modes.h > > > > Back porch = [hv]total - [hv]sync_end > > > > So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as > > mode->vtotal - mode->vsync_end > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > > --- > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > index 1c7e42015645..599284971ab6 100644 > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, > > regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG, > > SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end - > > mode->vsync_start) | > > - SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start - > > - mode->vdisplay)); > > + SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal - > > + mode->vsync_end)); > > Is it purely theoretical, or did you find some source that back that? VSA is done as per that, sync_end - sync start would give sync time. VBP also done in BPI-M64-bsp[1] which results back porch existing code results fron porch. [1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
