LVDS and RGB interfaces are always connected to TCONs which have channel
0. It doesn't make sense to try to init them on TV TCONs.
Add a check if TCON has channel 0 before trying to init LVDS or RGB
interface.
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 32 ++++++++++++++++--------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 5dae623968f7..b1205a7bc20f 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1117,23 +1117,25 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
goto err_free_dotclock;
}
- /*
- * If we have an LVDS panel connected to the TCON, we should
- * just probe the LVDS connector. Otherwise, just probe RGB as
- * we used to.
- */
- remote = of_graph_get_remote_node(dev->of_node, 1, 0);
- if (of_device_is_compatible(remote, "panel-lvds"))
- if (can_lvds)
- ret = sun4i_lvds_init(drm, tcon);
+ if (tcon->quirks->has_channel_0) {
+ /*
+ * If we have an LVDS panel connected to the TCON, we should
+ * just probe the LVDS connector. Otherwise, just probe RGB as
+ * we used to.
+ */
+ remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+ if (of_device_is_compatible(remote, "panel-lvds"))
+ if (can_lvds)
+ ret = sun4i_lvds_init(drm, tcon);
+ else
+ ret = -EINVAL;
else
- ret = -EINVAL;
- else
- ret = sun4i_rgb_init(drm, tcon);
- of_node_put(remote);
+ ret = sun4i_rgb_init(drm, tcon);
+ of_node_put(remote);
- if (ret < 0)
- goto err_free_dotclock;
+ if (ret < 0)
+ goto err_free_dotclock;
+ }
if (tcon->quirks->needs_de_be_mux) {
/*
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
