DW HDMI PHY driver and PHY clock driver share same registers. Make sure that DW HDMI PHY setup code doesn't change any clock related bits and set them to 0 during initialization. Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> --- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 +- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h index 79154f0f674a..3ba71aff92fc 100644 --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h @@ -98,7 +98,7 @@ #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN BIT(29) #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN BIT(28) #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 BIT(27) -#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL BIT(26) +#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK BIT(26) #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN BIT(25) #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x) ((x) << 22) #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x) ((x) << 20) diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 966688f04741..cd07ceb71601 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi, regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0); - regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init); + /* + * NOTE: We have to be careful not to overwrite PHY parent + * clock selection bit and clock divider. + */ + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, + (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK, + pll_cfg1_init); regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK, pll_cfg2_init); @@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy) SUN8I_HDMI_PHY_ANA_CFG3_SCLEN | SUN8I_HDMI_PHY_ANA_CFG3_SDAEN); + /* reset PLL clock configuration */ + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0); + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0); + /* set HW control of CEC pins */ regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0); -- 2.17.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
