[PATCH v2 1/2] drm/blend: Add per-plane pixel blend mode property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.

Add a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.

Defines three blend modes in drm_blend.h.

Signed-off-by: Lowry Li <lowry.li@xxxxxxx>
---
 drivers/gpu/drm/drm_atomic.c        |   4 ++
 drivers/gpu/drm/drm_atomic_helper.c |   1 +
 drivers/gpu/drm/drm_blend.c         | 110 ++++++++++++++++++++++++++++++++++++
 include/drm/drm_blend.h             |   6 ++
 include/drm/drm_plane.h             |   6 ++
 5 files changed, 127 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 7d25c42..467f8de 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -783,6 +783,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
 		state->src_w = val;
 	} else if (property == config->prop_src_h) {
 		state->src_h = val;
+	} else if (property == plane->blend_mode_property) {
+		state->pixel_blend_mode = val;
 	} else if (property == plane->rotation_property) {
 		if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK))
 			return -EINVAL;
@@ -848,6 +850,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
 		*val = state->src_w;
 	} else if (property == config->prop_src_h) {
 		*val = state->src_h;
+	} else if (property == plane->blend_mode_property) {
+		*val = state->pixel_blend_mode;
 	} else if (property == plane->rotation_property) {
 		*val = state->rotation;
 	} else if (property == plane->zpos_property) {
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index c356545..ddbd0d2 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -3484,6 +3484,7 @@ void drm_atomic_helper_plane_reset(struct drm_plane *plane)
 	if (plane->state) {
 		plane->state->plane = plane;
 		plane->state->rotation = DRM_MODE_ROTATE_0;
+		plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
 	}
 }
 EXPORT_SYMBOL(drm_atomic_helper_plane_reset);
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 5a81e1b..4ac45da 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -100,6 +100,41 @@
  *	planes. Without this property the primary plane is always below the cursor
  *	plane, and ordering between all other planes is undefined.
  *
+ * pixel blend mode:
+ *	Pixel blend mode is set up with drm_plane_create_blend_mode_property().
+ *	It adds a blend mode for alpha blending equation selection, describing
+ *	how the pixels from the current plane are composited with the
+ *	background.
+ *
+ *	Three alpha blending equations(note that the fg.rgb or bg.rgb notation
+ *	means each of the R, G or B channels for the foreground and background
+ *	colors, respectively):
+ *
+ *	"None": Blend formula that ignores the pixel alpha.
+ *	out.rgb = plane_alpha * fg.rgb + (1 - plane_alpha) * bg.rgb
+ *
+ *	"Pre-multiplied": Blend formula that assumes the pixel color values
+ *	have been already pre-multiplied with the alpha
+ *	channel values.
+ *	out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ *	"Coverage": Blend formula that assumes the pixel color values have not
+ *	been pre-multiplied and will do so when blending them to the background
+ *	color values.
+ *	out.rgb = plane_alpha * fg.alpha * fg.rgb +
+ *		  (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ *	fg.rgb: Each of the RGB component values from the plane's pixel
+ *	fg.alpha: Alpha component value from the plane's pixel
+ *	bg.rgb: Each of the RGB component values from the background
+ *	plane_alpha: Plane alpha value set by the plane alpha property (if
+ *		     applicable).
+ *
+ *	This property has no effect on formats with no pixel alpha, as fg.alpha
+ *	is assumed to be 1.0. If the plane does not expose the "alpha" property,
+ *	then plane_alpha is assumed to be 1.0, otherwise, it is the value of the
+ *	"alpha" property.
+ *
  * Note that all the property extensions described here apply either to the
  * plane or the CRTC (e.g. for the background color, which currently is not
  * exposed and assumed to be black).
@@ -409,3 +444,78 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 	return 0;
 }
 EXPORT_SYMBOL(drm_atomic_normalize_zpos);
+
+/**
+ * drm_plane_create_blend_mode_property - create a new blend mode property
+ * @plane: drm plane
+ * @supported_modes: bitmask of supported modes, must include
+ *		     BIT(DRM_MODE_BLEND_PREMULTI)
+ *
+ * This creates a new property describing the blend mode.
+ *
+ * The property exposed to userspace is an enumeration property (see
+ * drm_property_create_enum()) called "pixel blend mode" and has the
+ * following enumeration values:
+ *
+ * "None": Blend formula that ignores the pixel alpha.
+ *
+ * "Pre-multiplied": Blend formula that assumes the pixel color values have
+ *		     been already pre-multiplied with the alpha channel values.
+ *
+ * "Coverage": Blend formula that assumes the pixel color values have not been
+ *	       pre-multiplied and will do so when blending them to the
+ *	       background color values.
+ *
+ * RETURNS:
+ * Zero for success or -errno
+ */
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+					 unsigned int supported_modes)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_property *prop;
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_MODE_BLEND_PIXEL_NONE, "None" },
+		{ DRM_MODE_BLEND_PREMULTI, "Pre-multiplied" },
+		{ DRM_MODE_BLEND_COVERAGE, "Coverage" },
+	};
+	unsigned int valid_mode_mask = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+				       BIT(DRM_MODE_BLEND_PREMULTI)   |
+				       BIT(DRM_MODE_BLEND_COVERAGE);
+	int i, j = 0;
+
+	if (WARN_ON((supported_modes & ~valid_mode_mask) ||
+		    ((supported_modes & BIT(DRM_MODE_BLEND_PREMULTI)) == 0)))
+		return -EINVAL;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				   "pixel blend mode",
+				   hweight32(supported_modes));
+	if (!prop)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		int ret;
+
+		if (!(BIT(props[i].type) & supported_modes))
+			continue;
+
+		ret = drm_property_add_enum(prop, j++, props[i].type,
+					    props[i].name);
+
+		if (ret) {
+			drm_property_destroy(dev, prop);
+
+			return ret;
+		}
+	}
+
+	drm_object_attach_property(&plane->base, prop, DRM_MODE_BLEND_PREMULTI);
+	plane->blend_mode_property = prop;
+
+	if (plane->state)
+		plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 1760602..2966c0d 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -27,6 +27,10 @@
 #include <linux/ctype.h>
 #include <drm/drm_mode.h>
 
+#define DRM_MODE_BLEND_PIXEL_NONE	0
+#define DRM_MODE_BLEND_PREMULTI		1
+#define DRM_MODE_BLEND_COVERAGE		2
+
 struct drm_device;
 struct drm_atomic_state;
 struct drm_plane;
@@ -49,4 +53,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
 					     unsigned int zpos);
 int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+					 unsigned int supported_modes);
 #endif
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index f7bf4a4..447ebe7 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -43,6 +43,8 @@
  *	plane (in 16.16)
  * @src_w: width of visible portion of plane (in 16.16)
  * @src_h: height of visible portion of plane (in 16.16)
+ * @pixel_blend_mode: how the plane's framebuffer alpha channel is used when
+ *	blending with the background colour.
  * @rotation: rotation of the plane
  * @zpos: priority of the given plane on crtc (optional)
  *	Note that multiple active planes on the same crtc can have an identical
@@ -106,6 +108,8 @@ struct drm_plane_state {
 	uint32_t src_x, src_y;
 	uint32_t src_h, src_w;
 
+	uint16_t pixel_blend_mode;
+
 	/* Plane rotation */
 	unsigned int rotation;
 
@@ -498,6 +502,7 @@ enum drm_plane_type {
  * @type: type of plane (overlay, primary, cursor)
  * @zpos_property: zpos property for this plane
  * @rotation_property: rotation property for this plane
+ * @blend_mode_property: blend mode property for this plane
  * @helper_private: mid-layer private data
  */
 struct drm_plane {
@@ -573,6 +578,7 @@ struct drm_plane {
 
 	struct drm_property *zpos_property;
 	struct drm_property *rotation_property;
+	struct drm_property *blend_mode_property;
 
 	/**
 	 * @color_encoding_property:
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux