Re: [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 11, 2018 at 09:47:49PM +0200, Boris Brezillon wrote:
> On Fri, 11 May 2018 20:29:48 +0300
> Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> 
> > On Fri, May 11, 2018 at 07:12:21PM +0200, Boris Brezillon wrote:
> > > On Fri, 11 May 2018 19:54:02 +0300
> > > Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> > >   
> > > > On Fri, May 11, 2018 at 05:52:56PM +0200, Boris Brezillon wrote:  
> > > > > On Fri, 11 May 2018 18:34:50 +0300
> > > > > Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> > > > >     
> > > > > > On Fri, May 11, 2018 at 04:59:17PM +0200, Boris Brezillon wrote:    
> > > > > > > Applying an underscan setup is just a matter of scaling all planes
> > > > > > > appropriately and adjusting the CRTC X/Y offset to account for the
> > > > > > > horizontal and vertical border.
> > > > > > > 
> > > > > > > Create an vc4_plane_underscan_adj() function doing that and call it from
> > > > > > > vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
> > > > > > > underscan properties to the HDMI connector.
> > > > > > > 
> > > > > > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
> > > > > > > ---
> > > > > > > Changes in v2:
> > > > > > > - Take changes on hborder/vborder meaning into account
> > > > > > > ---
> > > > > > >  drivers/gpu/drm/vc4/vc4_plane.c | 49 ++++++++++++++++++++++++++++++++++++++++-
> > > > > > >  1 file changed, 48 insertions(+), 1 deletion(-)
> > > > > > > 
> > > > > > > diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
> > > > > > > index 71d44c357d35..61ed60841cd6 100644
> > > > > > > --- a/drivers/gpu/drm/vc4/vc4_plane.c
> > > > > > > +++ b/drivers/gpu/drm/vc4/vc4_plane.c
> > > > > > > @@ -258,6 +258,49 @@ static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
> > > > > > >  	}
> > > > > > >  }
> > > > > > >  
> > > > > > > +static int vc4_plane_underscan_adj(struct drm_plane_state *pstate)
> > > > > > > +{
> > > > > > > +	struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate);
> > > > > > > +	struct drm_connector_state *conn_state = NULL;
> > > > > > > +	struct drm_connector *conn;
> > > > > > > +	struct drm_crtc_state *crtc_state;
> > > > > > > +	int i;
> > > > > > > +
> > > > > > > +	for_each_new_connector_in_state(pstate->state, conn, conn_state, i) {
> > > > > > > +		if (conn_state->crtc == pstate->crtc)
> > > > > > > +			break;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	if (i == pstate->state->num_connector)
> > > > > > > +		return 0;
> > > > > > > +
> > > > > > > +	if (conn_state->underscan.mode != DRM_UNDERSCAN_ON)
> > > > > > > +		return 0;
> > > > > > > +
> > > > > > > +	crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
> > > > > > > +						   pstate->crtc);
> > > > > > > +
> > > > > > > +	if (conn_state->underscan.hborder >= crtc_state->mode.hdisplay ||
> > > > > > > +	    conn_state->underscan.vborder >= crtc_state->mode.vdisplay)
> > > > > > > +		return -EINVAL;      
> > > > > > 
> > > > > > border * 2 ?    
> > > > > 
> > > > > Oops, indeed. I'll fix that.
> > > > >     
> > > > > >     
> > > > > > > +
> > > > > > > +	vc4_pstate->crtc_x += conn_state->underscan.hborder;
> > > > > > > +	vc4_pstate->crtc_y += conn_state->underscan.vborder;
> > > > > > > +	vc4_pstate->crtc_w = (vc4_pstate->crtc_w *
> > > > > > > +			      (crtc_state->mode.hdisplay -
> > > > > > > +			       (conn_state->underscan.hborder * 2))) /
> > > > > > > +			     crtc_state->mode.hdisplay;
> > > > > > > +	vc4_pstate->crtc_h = (vc4_pstate->crtc_h *
> > > > > > > +			      (crtc_state->mode.vdisplay -
> > > > > > > +			       (conn_state->underscan.vborder * 2))) /
> > > > > > > +			     crtc_state->mode.vdisplay;      
> > > > > > 
> > > > > > So you're now scaling all planes? The code seems to reject scaling for
> > > > > > the cursor plane, how are you dealing with that? Or just no cursor
> > > > > > allowed when underscanning?    
> > > > > 
> > > > > No, I just didn't test with a cursor plane. We should probably avoid
> > > > > scaling the cursor plane and just adjust its position. Eric any opinion
> > > > > on that?    
> > > > 
> > > > I don't think you can just not scale it. The user asked for the cursor
> > > > to be at a specific place with a specific size. Can't just ignore
> > > > that and do something else. Also eg. i915 would definitely scale the
> > > > cursor since we'd just scale the entire crtc instead of scaling
> > > > individual planes. Different drivers doing different things wouldn't
> > > > be good.  
> > > 
> > > Except in our case the scaling takes place before the composition, so
> > > we don't have a choice.  
> > 
> > The choice is to either do what userspace asked, or return an error.
> 
> Come on! If we can't use underscan when there's a cursor plane enabled
> this feature is pretty much useless. But let's take a real use case to
> show you how negligible the lack of scaling on the cursor plane will
> be. Say you have borders taking 10% of you screen (which is already a
> lot), and your cursor is a plane of 64x64 pixels, you'll end up with a
> 64x64 cursor instead of 58x58. Quite frankly, I doubt you'll notice
> the difference.

Now you're assuming the cursor is only ever used as a cursor. It can
be used for other things and those may need to be positioned pixel
perfect in relation to other planes/fb contents.

We used to play is fast and loose in i915 when it came to the sprite
plane coordinates. People generally hated that, at least when it came
to the atomic ioctl. Basically we just adjusted the src/dst
coordinates until the hw was happy with them, partially ignoring
what the user had asked. Maarten recently nuked that code, and so
now we either respect the user's choice or we return an error.

I guess one way out of this conundrum would be to allow the cursor
to violate the user's requested parameters when controlled via the
legacy cursor ioctls. There are no atomicity guarantees there, so
I guess we could also say there are no other correctness guarantees
either. Not sure if the accuracy of the hotspot might become an issue
though.

Another option might be to just scale the cursor as well. If I
understand correctly the "cursor can't be scaled" limitation just
comes from the fact that some vblank synced resource needs to be
reconfigured whenever the scaling changes. So doing that for
unthrottled cursor updates is not easy. But in this case the
underscan properties are what determines the scaling so maybe that
resource could be reconfigured whenever the those props change
to make sure the cursor can always be scaled appropriately?

> 
> Anyway, I'd like to hear back from Eric on that, since he is the one
> who asked me to work on this feature.
> 
> > 
> > >   
> > > >   
> > > > >     
> > > > > > 
> > > > > > I'm also wondering if there's any way we can reconcile these border
> > > > > > props with the scaling mode prop, should we ever wish to expose
> > > > > > these props on connectors that already have the scaling mode prop.    
> > > > > 
> > > > > Nouveau seems to expose both, and I don't see why we couldn't.    
> > > > 
> > > > First of all the interaction of these borders with panels that have
> > > > a fixed mode would need to be properly specified. Do we apply the
> > > > borders against the user mode or the panel's native mode?  
> > > 
> > > Hm, I'm a bit lost. Isn't crtc_state->mode supposed to contain the mode
> > > that is about to be applied, no matter if it's a usermode or one of the
> > > mode returned by the display?   
> > 
> > No. With fixed mode panels the user mode is a lie. Only
> > hdisplay/vdisplay mean anything. The actual timings are known only to
> > the kernel.
> 
> So now you say that the driver can silently ignore what the userspace
> asked for and set what he thinks is appropriate based on what the HW
> supports. This clearly contradicts the statement you make a few lines
> above: driver should apply what userspace asked for or return an error
> when it's not possible.

It's an unfortunate legacy uapi design we have to live with. I agree
that it would be much better if userspace had more explicit control
over the crtc scaling/borders/etc.

> 
> > Well, userspace can perhaps make an educated guess based on
> > the connector's mode list and the presence of the scaling mode property.
> 
> But guess what? Where is the actual 'HW' mode stored if it's not in
> crtc_state->mode? I mean, the drivers needs to know what to apply, and
> almost all drivers are using atomic states to extract this information.

adjusted_mode is there for the driver to do as they wish. Eg. in i915
LVDS/eDP/DSI/etc. encoders will overwrite the adjusted_mode with the
panel's native mode at the appropriate time (for other encoder types
we just populate adjusted_mode with the user mode).

For the user it will still *look* like the mode they asked for (ie.
hdisplay/vdisplay determine how many visible pixels there are), but
internally we've replaced the timings with something different and
there may or may not scaling involved (depend on the scaling mode
property).

> 
> On a side note, I'd like to repeat what I already said before: I don't
> care how this "define borders" feature is exposed to userspace, as long
> as we have a way to express that the display we're using has borders
> and the output image should be scaled+moved accordingly.
> 
> So now it's time to reach a consensus, because I'm not going to try and
> guess what you expect. When I asked Daniel earlier this week whether he
> wanted me to do things differently than I did in my v1 or try to match
> what other drivers were already doing with the underscan prop, he told
> me we should try to converge to a generic underscan solution that keeps
> the existing userspace interface unchanged (basically what radeon,
> amdgpu and nouveau drivers expose today). You don't seem to agree with
> that. So now I'd like a clear answer, what should I do?

What do those drivers do when it comes to planes? I would expect that
they just scale the entire crtc instead of individual planes.

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux