On Fri, 11 May 2018 18:34:50 +0300
Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> On Fri, May 11, 2018 at 04:59:17PM +0200, Boris Brezillon wrote:
> > Applying an underscan setup is just a matter of scaling all planes
> > appropriately and adjusting the CRTC X/Y offset to account for the
> > horizontal and vertical border.
> >
> > Create an vc4_plane_underscan_adj() function doing that and call it from
> > vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
> > underscan properties to the HDMI connector.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
> > ---
> > Changes in v2:
> > - Take changes on hborder/vborder meaning into account
> > ---
> > drivers/gpu/drm/vc4/vc4_plane.c | 49 ++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 48 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
> > index 71d44c357d35..61ed60841cd6 100644
> > --- a/drivers/gpu/drm/vc4/vc4_plane.c
> > +++ b/drivers/gpu/drm/vc4/vc4_plane.c
> > @@ -258,6 +258,49 @@ static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
> > }
> > }
> >
> > +static int vc4_plane_underscan_adj(struct drm_plane_state *pstate)
> > +{
> > + struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate);
> > + struct drm_connector_state *conn_state = NULL;
> > + struct drm_connector *conn;
> > + struct drm_crtc_state *crtc_state;
> > + int i;
> > +
> > + for_each_new_connector_in_state(pstate->state, conn, conn_state, i) {
> > + if (conn_state->crtc == pstate->crtc)
> > + break;
> > + }
> > +
> > + if (i == pstate->state->num_connector)
> > + return 0;
> > +
> > + if (conn_state->underscan.mode != DRM_UNDERSCAN_ON)
> > + return 0;
> > +
> > + crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
> > + pstate->crtc);
> > +
> > + if (conn_state->underscan.hborder >= crtc_state->mode.hdisplay ||
> > + conn_state->underscan.vborder >= crtc_state->mode.vdisplay)
> > + return -EINVAL;
>
> border * 2 ?
Oops, indeed. I'll fix that.
>
> > +
> > + vc4_pstate->crtc_x += conn_state->underscan.hborder;
> > + vc4_pstate->crtc_y += conn_state->underscan.vborder;
> > + vc4_pstate->crtc_w = (vc4_pstate->crtc_w *
> > + (crtc_state->mode.hdisplay -
> > + (conn_state->underscan.hborder * 2))) /
> > + crtc_state->mode.hdisplay;
> > + vc4_pstate->crtc_h = (vc4_pstate->crtc_h *
> > + (crtc_state->mode.vdisplay -
> > + (conn_state->underscan.vborder * 2))) /
> > + crtc_state->mode.vdisplay;
>
> So you're now scaling all planes? The code seems to reject scaling for
> the cursor plane, how are you dealing with that? Or just no cursor
> allowed when underscanning?
No, I just didn't test with a cursor plane. We should probably avoid
scaling the cursor plane and just adjust its position. Eric any opinion
on that?
>
> I'm also wondering if there's any way we can reconcile these border
> props with the scaling mode prop, should we ever wish to expose
> these props on connectors that already have the scaling mode prop.
Nouveau seems to expose both, and I don't see why we couldn't.
> Maybe we just have to require the scaling mode to be set to fullscreen
> to allow borders to be specified explictly?
>
> > +
> > + if (!vc4_pstate->crtc_w || !vc4_pstate->crtc_h)
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
> > {
> > struct drm_plane *plane = state->plane;
> > @@ -269,7 +312,7 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
> > int num_planes = fb->format->num_planes;
> > u32 h_subsample = 1;
> > u32 v_subsample = 1;
> > - int i;
> > + int i, ret;
> >
> > for (i = 0; i < num_planes; i++)
> > vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
> > @@ -292,6 +335,10 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
> > vc4_state->crtc_w = state->crtc_w;
> > vc4_state->crtc_h = state->crtc_h;
> >
> > + ret = vc4_plane_underscan_adj(state);
> > + if (ret)
> > + return ret;
> > +
> > vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
> > vc4_state->crtc_w);
> > vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
> > --
> > 2.14.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
