On Fri, May 04, 2018 at 03:18:00PM -0700, matthew.s.atwood@xxxxxxxxx wrote:
> From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
>
> DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
> bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
> receiver capabilities. For panels that use this new feature wait interval
> would be increased by 512 ms, when spec is max 16 ms. This behavior is
> described in table 2-158 of DP 1.4 spec address 0000eh.
>
> With the introduction of DP 1.4 spec main link clock recovery was
> standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
>
> To avoid breaking panels that are not spec compiant we now warn on
> invalid values.
>
> V2: commit title/message, masking all 7 bits, warn on out of spec values.
> V3: commit message, make link train clock recovery follow DP 1.4 spec.
> V4: style changes
> V5: typo
> V6: print statement revisions, DP_REV to DPCD_REV, comment correction
> V7: typo
> V8: Style
> V9: Strip out DPCD_REV_XX into seperate patch
> v10: DPCD_REV_XX to DP_DPCD_REV_XX
>
> Signed-off-by: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
patches pushed to drm-misc-next.
Thanks,
Rodrigo.
> ---
> drivers/gpu/drm/drm_dp_helper.c | 22 ++++++++++++++++++----
> include/drm/drm_dp_helper.h | 1 +
> 2 files changed, 19 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index ffe14ec3e7f2..36c7609a4bd5 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -119,18 +119,32 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
> EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
>
> void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
> - if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> + int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> + DP_TRAINING_AUX_RD_MASK;
> +
> + if (rd_interval > 4)
> + DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
> + rd_interval);
> +
> + if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
> udelay(100);
> else
> - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> + mdelay(rd_interval * 4);
> }
> EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
>
> void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
> - if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> + int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> + DP_TRAINING_AUX_RD_MASK;
> +
> + if (rd_interval > 4)
> + DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
> + rd_interval);
> +
> + if (rd_interval == 0)
> udelay(400);
> else
> - mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> + mdelay(rd_interval * 4);
> }
> EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 96dcef479ed6..ecf3e2bf293b 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -124,6 +124,7 @@
> # define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
>
> #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
> +# define DP_TRAINING_AUX_RD_MASK 0x7F /* XXX 1.2? */
>
> #define DP_ADAPTER_CAP 0x00f /* 1.2 */
> # define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
> --
> 2.17.0
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
