From: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.
With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
To avoid breaking panels that are not spec compiant we now warn on
invalid values.
V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX
Signed-off-by: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
drivers/gpu/drm/drm_dp_helper.c | 22 ++++++++++++++++++----
include/drm/drm_dp_helper.h | 1 +
2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index ffe14ec3e7f2..36c7609a4bd5 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -119,18 +119,32 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
- if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+ int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+ DP_TRAINING_AUX_RD_MASK;
+
+ if (rd_interval > 4)
+ DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
+ rd_interval);
+
+ if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
udelay(100);
else
- mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+ mdelay(rd_interval * 4);
}
EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
- if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+ int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+ DP_TRAINING_AUX_RD_MASK;
+
+ if (rd_interval > 4)
+ DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
+ rd_interval);
+
+ if (rd_interval == 0)
udelay(400);
else
- mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+ mdelay(rd_interval * 4);
}
EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 96dcef479ed6..ecf3e2bf293b 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -124,6 +124,7 @@
# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
+# define DP_TRAINING_AUX_RD_MASK 0x7F /* XXX 1.2? */
#define DP_ADAPTER_CAP 0x00f /* 1.2 */
# define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
--
2.17.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
