On Thu, May 3, 2018 at 2:06 PM, Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > Hi Dave, > > Ping ? Not aware of any crc core work going on in drm, so has my ack. Worst case we do a topic branch or something like that (since I guess you'll do a pull request anyway on the v4l side). Acked-by: me. -Daniel > > On Saturday, 28 April 2018 23:50:19 EEST Laurent Pinchart wrote: >> Hello, >> >> (Dave, there's a request for you below) >> >> This patch series adds support for CRC calculation to the rcar-du-drm >> driver. >> >> CRC calculation is supported starting at the Renesas R-Car Gen3 SoCs, as >> earlier versions don't have the necessary hardware. On Gen3 SoCs, the CRC is >> computed by the DISCOM module part of the VSP-D and VSP-DL. >> >> The DISCOM is interfaced to the VSP through the UIF glue and appears as a >> VSP entity with a sink pad and a source pad. >> >> The series starts with a switch to SPDX license headers in patch 1/8, >> prompted by a checkpatch.pl warning for a later patch that complained about >> missing SPDX license headers. It then continues with cleanup and >> refactoring. Patches 2/8 and 3/8 prepare for DISCOM and UIF support by >> extending generic code to make it usable for the UIF. Patch 4/8 documents a >> structure that will receive new fields. >> >> Patch 5/8 then extends the API exposed by the VSP driver to the DU driver to >> support CRC computation configuration and reporting. The patch >> unfortunately needs to touch both the VSP and DU drivers, so the whole >> series will need to be merged through a single tree. >> >> Patch 5/8 adds support for the DISCOM and UIF in the VSP driver, patch 7/8 >> integrates it in the DRM pipeline, and patch 8/8 finally implements the CRC >> API in the DU driver to expose CRC computation to userspace. >> >> The hardware supports computing the CRC at any arbitrary point in the >> pipeline on a configurable window of the frame. This patch series supports >> CRC computation on input planes or pipeline output, but on the full frame >> only. Support for CRC window configuration can be added later if needed but >> will require extending the userspace API, as the DRM/KMS CRC API doesn't >> support this feature. >> >> Compared to v1, the CRC source names for plane inputs are now constructed >> from plane IDs instead of plane indices. This allows userspace to match CRC >> sources with planes. >> >> Compared to v2, various small issues reported by reviewers have been fixed. >> I believe the series to now be ready for upstream merge. >> >> Note that exposing the DISCOM and UIF though the V4L2 API isn't supported as >> the module is only found in VSP-D and VSP-DL instances that are not exposed >> through V4L2. It is possible to expose those instances through V4L2 with a >> small modification to the driver for testing purpose. If the need arises to >> test DISCOM and UIF with such an out-of-tree patch, support for CRC >> reporting through a V4L2 control can be added later without affecting how >> CRC is exposed through the DRM/KMS API. >> >> The patches are based on top of the "[PATCH v2 00/15] R-Car VSP1: >> Dynamically assign blend units to display pipelines" patch series, itself >> based on top of the Linux media master branch and scheduled for merge in >> v4.18. The new base caused heavy conflicts, requiring this series to be >> merged through the V4L2 tree. >> >> Dave, I have verified that this series merges cleanly with your drm-next and >> drm-fixes branches, with the drm-misc-next and drm-misc-fixes branches, and >> with the R-Car DU patches I would like to get merged in v4.18 through your >> tree. Could I get your ack to merge this through the V4L2 tree ? >> >> For convenience the patches are available at >> >> git://linuxtv.org/pinchartl/media.git vsp1-discom-v3-20180428 >> >> The code has been tested through the kms-test-crc.py script part of the DU >> test suite available at >> >> git://git.ideasonboard.com/renesas/kms-tests.git discom >> >> Laurent Pinchart (8): >> v4l: vsp1: Use SPDX license headers >> v4l: vsp1: Share the CLU, LIF and LUT set_fmt pad operation code >> v4l: vsp1: Reset the crop and compose rectangles in the set_fmt helper >> v4l: vsp1: Document the vsp1_du_atomic_config structure >> v4l: vsp1: Extend the DU API to support CRC computation >> v4l: vsp1: Add support for the DISCOM entity >> v4l: vsp1: Integrate DISCOM in display pipeline >> drm: rcar-du: Add support for CRC computation >> >> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 156 ++++++++++++++++- >> drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 15 ++ >> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 12 +- >> drivers/media/platform/vsp1/Makefile | 2 +- >> drivers/media/platform/vsp1/vsp1.h | 10 +- >> drivers/media/platform/vsp1/vsp1_brx.c | 6 +- >> drivers/media/platform/vsp1/vsp1_brx.h | 6 +- >> drivers/media/platform/vsp1/vsp1_clu.c | 71 ++------ >> drivers/media/platform/vsp1/vsp1_clu.h | 6 +- >> drivers/media/platform/vsp1/vsp1_dl.c | 8 +- >> drivers/media/platform/vsp1/vsp1_dl.h | 6 +- >> drivers/media/platform/vsp1/vsp1_drm.c | 127 ++++++++++++-- >> drivers/media/platform/vsp1/vsp1_drm.h | 15 +- >> drivers/media/platform/vsp1/vsp1_drv.c | 26 ++- >> drivers/media/platform/vsp1/vsp1_entity.c | 103 +++++++++++- >> drivers/media/platform/vsp1/vsp1_entity.h | 13 +- >> drivers/media/platform/vsp1/vsp1_hgo.c | 6 +- >> drivers/media/platform/vsp1/vsp1_hgo.h | 6 +- >> drivers/media/platform/vsp1/vsp1_hgt.c | 6 +- >> drivers/media/platform/vsp1/vsp1_hgt.h | 6 +- >> drivers/media/platform/vsp1/vsp1_histo.c | 65 +------ >> drivers/media/platform/vsp1/vsp1_histo.h | 6 +- >> drivers/media/platform/vsp1/vsp1_hsit.c | 6 +- >> drivers/media/platform/vsp1/vsp1_hsit.h | 6 +- >> drivers/media/platform/vsp1/vsp1_lif.c | 71 ++------ >> drivers/media/platform/vsp1/vsp1_lif.h | 6 +- >> drivers/media/platform/vsp1/vsp1_lut.c | 71 ++------ >> drivers/media/platform/vsp1/vsp1_lut.h | 6 +- >> drivers/media/platform/vsp1/vsp1_pipe.c | 6 +- >> drivers/media/platform/vsp1/vsp1_pipe.h | 6 +- >> drivers/media/platform/vsp1/vsp1_regs.h | 46 ++++- >> drivers/media/platform/vsp1/vsp1_rpf.c | 6 +- >> drivers/media/platform/vsp1/vsp1_rwpf.c | 6 +- >> drivers/media/platform/vsp1/vsp1_rwpf.h | 6 +- >> drivers/media/platform/vsp1/vsp1_sru.c | 6 +- >> drivers/media/platform/vsp1/vsp1_sru.h | 6 +- >> drivers/media/platform/vsp1/vsp1_uds.c | 6 +- >> drivers/media/platform/vsp1/vsp1_uds.h | 6 +- >> drivers/media/platform/vsp1/vsp1_uif.c | 271 +++++++++++++++++++++++++++ >> drivers/media/platform/vsp1/vsp1_uif.h | 32 ++++ >> drivers/media/platform/vsp1/vsp1_video.c | 6 +- >> drivers/media/platform/vsp1/vsp1_video.h | 6 +- >> drivers/media/platform/vsp1/vsp1_wpf.c | 6 +- >> include/media/vsp1.h | 45 ++++- >> 44 files changed, 892 insertions(+), 417 deletions(-) >> create mode 100644 drivers/media/platform/vsp1/vsp1_uif.c >> create mode 100644 drivers/media/platform/vsp1/vsp1_uif.h > > -- > Regards, > > Laurent Pinchart > > > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
