Re: [PATCH v3 0/8] R-Car DU: Support CRC calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dave,

Ping ?

On Saturday, 28 April 2018 23:50:19 EEST Laurent Pinchart wrote:
> Hello,
> 
> (Dave, there's a request for you below)
> 
> This patch series adds support for CRC calculation to the rcar-du-drm
> driver.
> 
> CRC calculation is supported starting at the Renesas R-Car Gen3 SoCs, as
> earlier versions don't have the necessary hardware. On Gen3 SoCs, the CRC is
> computed by the DISCOM module part of the VSP-D and VSP-DL.
> 
> The DISCOM is interfaced to the VSP through the UIF glue and appears as a
> VSP entity with a sink pad and a source pad.
> 
> The series starts with a switch to SPDX license headers in patch 1/8,
> prompted by a checkpatch.pl warning for a later patch that complained about
> missing SPDX license headers. It then continues with cleanup and
> refactoring. Patches 2/8 and 3/8 prepare for DISCOM and UIF support by
> extending generic code to make it usable for the UIF. Patch 4/8 documents a
> structure that will receive new fields.
> 
> Patch 5/8 then extends the API exposed by the VSP driver to the DU driver to
> support CRC computation configuration and reporting. The patch
> unfortunately needs to touch both the VSP and DU drivers, so the whole
> series will need to be merged through a single tree.
> 
> Patch 5/8 adds support for the DISCOM and UIF in the VSP driver, patch 7/8
> integrates it in the DRM pipeline, and patch 8/8 finally implements the CRC
> API in the DU driver to expose CRC computation to userspace.
> 
> The hardware supports computing the CRC at any arbitrary point in the
> pipeline on a configurable window of the frame. This patch series supports
> CRC computation on input planes or pipeline output, but on the full frame
> only. Support for CRC window configuration can be added later if needed but
> will require extending the userspace API, as the DRM/KMS CRC API doesn't
> support this feature.
> 
> Compared to v1, the CRC source names for plane inputs are now constructed
> from plane IDs instead of plane indices. This allows userspace to match CRC
> sources with planes.
> 
> Compared to v2, various small issues reported by reviewers have been fixed.
> I believe the series to now be ready for upstream merge.
> 
> Note that exposing the DISCOM and UIF though the V4L2 API isn't supported as
> the module is only found in VSP-D and VSP-DL instances that are not exposed
> through V4L2. It is possible to expose those instances through V4L2 with a
> small modification to the driver for testing purpose. If the need arises to
> test DISCOM and UIF with such an out-of-tree patch, support for CRC
> reporting through a V4L2 control can be added later without affecting how
> CRC is exposed through the DRM/KMS API.
> 
> The patches are based on top of the "[PATCH v2 00/15] R-Car VSP1:
> Dynamically assign blend units to display pipelines" patch series, itself
> based on top of the Linux media master branch and scheduled for merge in
> v4.18. The new base caused heavy conflicts, requiring this series to be
> merged through the V4L2 tree.
> 
> Dave, I have verified that this series merges cleanly with your drm-next and
> drm-fixes branches, with the drm-misc-next and drm-misc-fixes branches, and
> with the R-Car DU patches I would like to get merged in v4.18 through your
> tree. Could I get your ack to merge this through the V4L2 tree ?
> 
> For convenience the patches are available at
> 
>         git://linuxtv.org/pinchartl/media.git vsp1-discom-v3-20180428
> 
> The code has been tested through the kms-test-crc.py script part of the DU
> test suite available at
> 
>         git://git.ideasonboard.com/renesas/kms-tests.git discom
> 
> Laurent Pinchart (8):
>   v4l: vsp1: Use SPDX license headers
>   v4l: vsp1: Share the CLU, LIF and LUT set_fmt pad operation code
>   v4l: vsp1: Reset the crop and compose rectangles in the set_fmt helper
>   v4l: vsp1: Document the vsp1_du_atomic_config structure
>   v4l: vsp1: Extend the DU API to support CRC computation
>   v4l: vsp1: Add support for the DISCOM entity
>   v4l: vsp1: Integrate DISCOM in display pipeline
>   drm: rcar-du: Add support for CRC computation
> 
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 156 ++++++++++++++++-
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h    |  15 ++
>  drivers/gpu/drm/rcar-du/rcar_du_vsp.c     |  12 +-
>  drivers/media/platform/vsp1/Makefile      |   2 +-
>  drivers/media/platform/vsp1/vsp1.h        |  10 +-
>  drivers/media/platform/vsp1/vsp1_brx.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_brx.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_clu.c    |  71 ++------
>  drivers/media/platform/vsp1/vsp1_clu.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_dl.c     |   8 +-
>  drivers/media/platform/vsp1/vsp1_dl.h     |   6 +-
>  drivers/media/platform/vsp1/vsp1_drm.c    | 127 ++++++++++++--
>  drivers/media/platform/vsp1/vsp1_drm.h    |  15 +-
>  drivers/media/platform/vsp1/vsp1_drv.c    |  26 ++-
>  drivers/media/platform/vsp1/vsp1_entity.c | 103 +++++++++++-
>  drivers/media/platform/vsp1/vsp1_entity.h |  13 +-
>  drivers/media/platform/vsp1/vsp1_hgo.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_hgo.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_hgt.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_hgt.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_histo.c  |  65 +------
>  drivers/media/platform/vsp1/vsp1_histo.h  |   6 +-
>  drivers/media/platform/vsp1/vsp1_hsit.c   |   6 +-
>  drivers/media/platform/vsp1/vsp1_hsit.h   |   6 +-
>  drivers/media/platform/vsp1/vsp1_lif.c    |  71 ++------
>  drivers/media/platform/vsp1/vsp1_lif.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_lut.c    |  71 ++------
>  drivers/media/platform/vsp1/vsp1_lut.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_pipe.c   |   6 +-
>  drivers/media/platform/vsp1/vsp1_pipe.h   |   6 +-
>  drivers/media/platform/vsp1/vsp1_regs.h   |  46 ++++-
>  drivers/media/platform/vsp1/vsp1_rpf.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_rwpf.c   |   6 +-
>  drivers/media/platform/vsp1/vsp1_rwpf.h   |   6 +-
>  drivers/media/platform/vsp1/vsp1_sru.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_sru.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_uds.c    |   6 +-
>  drivers/media/platform/vsp1/vsp1_uds.h    |   6 +-
>  drivers/media/platform/vsp1/vsp1_uif.c    | 271 +++++++++++++++++++++++++++
>  drivers/media/platform/vsp1/vsp1_uif.h    |  32 ++++
>  drivers/media/platform/vsp1/vsp1_video.c  |   6 +-
>  drivers/media/platform/vsp1/vsp1_video.h  |   6 +-
>  drivers/media/platform/vsp1/vsp1_wpf.c    |   6 +-
>  include/media/vsp1.h                      |  45 ++++-
>  44 files changed, 892 insertions(+), 417 deletions(-)
>  create mode 100644 drivers/media/platform/vsp1/vsp1_uif.c
>  create mode 100644 drivers/media/platform/vsp1/vsp1_uif.h

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux