On 18.04.2018 14:19, Sandeep Panda wrote: > Changelog: > > v3 -> v4: > Current patchset separates out eDP panel specific resources from sn65dsi86 > bridge driver and creates a separate driver for the innloux edp panel. > > Now bridge driver check if any panel is attached or not to get the supported > modes. If any panel is attached then query from panel driver to get the modes, > or else probe the provided i2c adapter to read the modes from EDID. > > Removed hardcoding of bridge init sequence. With this patchset bridge driver now > will program the init sequence based on the current mode set by drm framework. > > Current patchset is not tested on actual bridge chip/panel. One more thing, could you use proper prefixes in subject: - no double braces, - patch version, - no DPU, - RFC up to you, but in case of driver which you want to eventually merge it seems unnecessary. So subject should look more or less like: [PATCH v4 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel driver Regards Andrzej > > Sandeep Panda (4): > drm/bridge: add support for sn65dsi86 bridge driver > dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings > drm/panel: add Innolux TV123WAM eDP panel driver > dt-bindings: Add Innolux TV123WAM panel bindings > > .../bindings/display/bridge/ti,sn65dsi86.txt | 60 ++ > .../display/panel/innolux,edp-2k-panel.txt | 21 + > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 742 +++++++++++++++++++++ > drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 299 +++++++++ > 4 files changed, 1122 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt > create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c > create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
