Changelog: v4: - Current patchset separates out eDP panel specific resources from sn65dsi86 bridge driver and creates a separate driver for the innloux edp panel. - Removed the unnecessary header files and variables used in driver. - Replaced irq_gpio as "interrupts" property in dt-bindings. - Use of regmap interface for i2c transactions in bridge driver. - Changed the edp panel driver prefixes from "panel_edp_2k "to "innloux_edp_2k" - Current patches are not tested on actual bridge chip/panel. - Updated Copyright and License. - Need to conclude on, if we need to the programming of edp panel video timeings in mode_set(). Sandeep Panda (4): drm/bridge: add support for sn65dsi86 bridge driver dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings drm/panel: add Innolux TV123WAM eDP panel driver dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings .../bindings/display/bridge/ti,sn65dsi86.txt | 61 ++ .../display/panel/innolux,edp-2k-panel.txt | 21 + drivers/gpu/drm/bridge/ti-sn65dsi86.c | 690 +++++++++++++++++++++ drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 293 +++++++++ 4 files changed, 1065 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
