2011/11/15 Kristian Høgsberg <krh@xxxxxxxxxxxxx>: > On Mon, Nov 14, 2011 at 5:54 PM, Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> wrote: >> On Mon, 14 Nov 2011 21:47:09 +0100 >> David Herrmann <dh.herrmann@xxxxxxxxxxxxxx> wrote: >>> > I had to modify the resolution the test was searching for >>> > to 1920x1200 instead of 1024x600 since I tested on a DP attached >>> > monitor, and fix the connector id, but other than that it seemed to >>> > work fine. >>> >>> Thanks for testing. At least my code seems right now, but I still >>> cannot get it to work on my machine. The output of modetest is: >>> https://gist.github.com/1365083 >>> >>> There is only one connected connector+encoder+mode so I don't know >>> where the problem exactly is. Are there any debug options? Is it >>> possible to query the EGLImage for width/height? >> >> Ok maybe the gen3 vs gen4 EGL image code isn't calculating the >> width/stride correctly somewhere then. You'd have to walk through the >> gbm_dri2.c and egl_dri2.c code and see where the width is going off >> into the weeds. > > Could be, I know I've run Wayland on Pineview though, so that works at > least. David, did you try eglkms from mesa demos? > > http://cgit.freedesktop.org/mesa/demos/tree/src/egl/opengl/eglkms.c I tried it now. I get a black screen and in the left quarter there is one white triangle which fades to black. But again, the right 3/4 of the screen are black. > Kristian > I will try to debug my mesa package but this will probably take some time. If someone has an idea how to find the bug faster, just tell me ;) Regards David _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
