On Mon, Nov 14, 2011 at 5:54 PM, Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> wrote: > On Mon, 14 Nov 2011 21:47:09 +0100 > David Herrmann <dh.herrmann@xxxxxxxxxxxxxx> wrote: >> > I had to modify the resolution the test was searching for >> > to 1920x1200 instead of 1024x600 since I tested on a DP attached >> > monitor, and fix the connector id, but other than that it seemed to >> > work fine. >> >> Thanks for testing. At least my code seems right now, but I still >> cannot get it to work on my machine. The output of modetest is: >> https://gist.github.com/1365083 >> >> There is only one connected connector+encoder+mode so I don't know >> where the problem exactly is. Are there any debug options? Is it >> possible to query the EGLImage for width/height? > > Ok maybe the gen3 vs gen4 EGL image code isn't calculating the > width/stride correctly somewhere then. You'd have to walk through the > gbm_dri2.c and egl_dri2.c code and see where the width is going off > into the weeds. Could be, I know I've run Wayland on Pineview though, so that works at least. David, did you try eglkms from mesa demos? http://cgit.freedesktop.org/mesa/demos/tree/src/egl/opengl/eglkms.c Kristian _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
