On Wed, Jan 31, 2018 at 7:54 AM, Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote:
> Am Dienstag, den 30.01.2018, 21:29 +0100 schrieb Thierry Escande:
>> From: Sean Paul <seanpaul@xxxxxxxxxxxx>
>>
>> Change the mode for Sharp lq123p1jx31 panel to something more
>> rockchip-friendly such that we can use the fixed PLLs to
>> generate the pixel clock
>
> This should really switch to a display timing instead of exposing a
> single mode. The display timing has min, typical, max tuples for all
> the timings values, which would allow the attached driver to vary the
> timings inside the allowed bounds if it makes sense.
>
> Trying to hit a specific pixel clock to free up a PLL is exactly one of
> the use cases envisioned for the display timings stuff.
>
Agreed, I think we had this discussion the first time around. We
should drop this patch.
Thanks for catching this!
Sean
> Regards,
> Lucas
>
>> Cc: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>> Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
>> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>> Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/panel/panel-simple.c | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>> b/drivers/gpu/drm/panel/panel-simple.c
>> index 5591984a392b..a4a6ea3ca0e6 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -1742,17 +1742,18 @@ static const struct panel_desc
>> sharp_lq101k1ly04 = {
>> };
>>
>> static const struct drm_display_mode sharp_lq123p1jx31_mode = {
>> - .clock = 252750,
>> + .clock = 266667,
>> .hdisplay = 2400,
>> .hsync_start = 2400 + 48,
>> .hsync_end = 2400 + 48 + 32,
>> - .htotal = 2400 + 48 + 32 + 80,
>> + .htotal = 2400 + 48 + 32 + 139,
>> .vdisplay = 1600,
>> .vsync_start = 1600 + 3,
>> .vsync_end = 1600 + 3 + 10,
>> - .vtotal = 1600 + 3 + 10 + 33,
>> + .vtotal = 1600 + 3 + 10 + 84,
>> .vrefresh = 60,
>> .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
>> + .type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER,
>> };
>>
>> static const struct panel_desc sharp_lq123p1jx31 = {
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
