[Bug 104660] DC R9 285 dual link DVI modes not shown.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 3 on bug 104660 from
Thanks, that works.

This is the same with non dc, but is there a reason they are a bit low?

  1920x1080 (0x5b) 285.500MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock 137.26KHz
        v: height 1080 start 1083 end 1088 total 1144           clock 119.98Hz

 1920x1080 (0x5c) 260.250MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock 125.12KHz
        v: height 1080 start 1083 end 1088 total 1138           clock 109.95Hz

 1920x1080 (0x5d) 235.500MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock 113.22KHz
        v: height 1080 start 1083 end 1088 total 1133           clock  99.93Hz

I was hoping DC would differ from the old driver in giving exact Hz for these.


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux