Re: [PATCH v2 4/6] drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Den 14.11.2017 16.23, skrev Stefan Agner:
On 2017-11-10 19:06, Noralf Trønnes wrote:
Den 10.11.2017 17.39, skrev Stefan Agner:
On 2017-11-09 17:49, Noralf Trønnes wrote:
Den 09.11.2017 15.34, skrev Stefan Agner:
On 2017-11-06 20:18, Noralf Trønnes wrote:
Replace driver's code with the generic helpers that do the same thing.
Tested using:
echo devices > /sys/power/pm_test
echo freeze > /sys/power/state


Note, currently I do get, but even without this patches, so this is
something else:

[  930.992433] ------------[ cut here ]------------
[  930.992494] WARNING: CPU: 0 PID: 361 at
drivers/gpu/drm/drm_atomic_helper.c:1249
drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288
[  930.992502] [CRTC:28:crtc-0] vblank wait timed out
I resolved that issue and another related to suspend/resume for the DCU
driver:
https://patchwork.freedesktop.org/series/33616/

Suspend/resume is not supported for the platform (Vybrid) I usually test
on, so that is why I did not catch this earlier.

This two patches are now on-top of your changes. How can we make sure
this goes through smoothly? For which merge window are you targeting
your changes?
drm-misc is always open so I'm planning to apply it this weekend or
maybe monday.
This means it will go into 4.16. Maybe you need to fix it before that?
The issues were already present in 4.14, so anyway to late for that. The
suspend/resume platform support for the SoC using this IP is missing in
mainline anyway, so in practice this patches are not that critical. I
probably will backport it for v4.14 since its LTS once it hits mainline.

In that case shouldn't you fix that issue first with fixes tag and cc stable? Then I can rebase this patch on top of that. This way we avoid merge conflict
when your fix is backported to 4.14 and 4.15.

Or have I missed something here?

Noralf.


So from my point of view, 4.16 is fine.

Should I create a separate pull request for those or can you pick them
up directly?

--
Stefan


Could you help me out by acking the tinydrm patch in this series?

Noralf.

--
Stefan

Tested-by: Stefan Agner <stefan@xxxxxxxx>
Acked-by: Stefan Agner <stefan@xxxxxxxx>

Will you take the patch through drm-misc?
Yes if that's fine with you, thanks for testing.

Noralf.

--
Stefan



Cc: Stefan Agner <stefan@xxxxxxxx>
Cc: Alison Wang <alison.wang@xxxxxxxxxxxxx>
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
    drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 24 ++++++------------------
    drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h |  1 -
    2 files changed, 6 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 58e9e0601a61..1a9ee657bbac 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -27,6 +27,7 @@
    #include <drm/drm_crtc_helper.h>
    #include <drm/drm_fb_cma_helper.h>
    #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_modeset_helper.h>
      #include "fsl_dcu_drm_crtc.h"
    #include "fsl_dcu_drm_drv.h"
@@ -188,26 +189,17 @@ static struct drm_driver fsl_dcu_drm_driver = {
    static int fsl_dcu_drm_pm_suspend(struct device *dev)
    {
    	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
+	int ret;
      	if (!fsl_dev)
    		return 0;
      	disable_irq(fsl_dev->irq);
-	drm_kms_helper_poll_disable(fsl_dev->drm);
    -	console_lock();
-	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 1);
-	console_unlock();
-
-	fsl_dev->state = drm_atomic_helper_suspend(fsl_dev->drm);
-	if (IS_ERR(fsl_dev->state)) {
-		console_lock();
-		drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
-		console_unlock();
-
-		drm_kms_helper_poll_enable(fsl_dev->drm);
+	ret = drm_mode_config_helper_suspend(fsl_dev->drm);
+	if (ret) {
    		enable_irq(fsl_dev->irq);
-		return PTR_ERR(fsl_dev->state);
+		return ret;
    	}
      	clk_disable_unprepare(fsl_dev->pix_clk);
@@ -233,13 +225,9 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
    	if (fsl_dev->tcon)
    		fsl_tcon_bypass_enable(fsl_dev->tcon);
    	fsl_dcu_drm_init_planes(fsl_dev->drm);
-	drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
    -	console_lock();
-	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
-	console_unlock();
+	drm_mode_config_helper_resume(fsl_dev->drm);
    -	drm_kms_helper_poll_enable(fsl_dev->drm);
    	enable_irq(fsl_dev->irq);
      	return 0;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index da9bfd432ca6..93bfb98012d4 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -196,7 +196,6 @@ struct fsl_dcu_drm_device {
    	struct drm_encoder encoder;
    	struct fsl_dcu_drm_connector connector;
    	const struct fsl_dcu_soc_data *soc;
-	struct drm_atomic_state *state;
    };
      int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux