Re: [PATCH v3 1/6] drm/rockchip/dsi: Define and use macros for PHY register addresses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 25, 2017 at 11:50:58AM +0800, Nickey Yang wrote:
> Replace the hardcoded register address numerical values with macros to
> clarify the code.
> 
> Signed-off-by: Nickey Yang <nickey.yang@xxxxxxxxxxxxxx>

Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 129 ++++++++++++++++++++++-----------
>  1 file changed, 85 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index b15755b..95ce253 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -254,6 +254,28 @@
>  #define DW_MIPI_NEEDS_PHY_CFG_CLK	BIT(0)
>  #define DW_MIPI_NEEDS_GRF_CLK		BIT(1)
>  
> +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL	0x10
> +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS	0x11
> +#define PLL_LPF_AND_CP_CONTROL	0x12
> +#define PLL_INPUT_DIVIDER_RATIO	0x17
> +#define PLL_LOOP_DIVIDER_RATIO	0x18
> +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL	0x19
> +#define BANDGAP_AND_BIAS_CONTROL	0x20
> +#define TERMINATION_RESISTER_CONTROL	0x21
> +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY	0x22
> +#define HS_RX_CONTROL_OF_LANE_0	0x44
> +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL	0x60
> +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL	0x61
> +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL	0x62
> +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL	0x63
> +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL	0x64
> +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL	0x65
> +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL	0x70
> +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL	0x71
> +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL	0x72
> +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL	0x73
> +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL	0x74
> +
>  enum {
>  	BANDGAP_97_07,
>  	BANDGAP_98_05,
> @@ -447,53 +469,72 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
>  		return ret;
>  	}
>  
> -	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
> -					 VCO_RANGE_CON_SEL(vco) |
> -					 VCO_IN_CAP_CON_LOW |
> -					 REF_BIAS_CUR_SEL);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
> -	dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
> -					 LPF_RESISTORS_20_KOHM);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
> -	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
> -					 LOW_PROGRAM_EN);
> -	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
> -					 HIGH_PROGRAM_EN);
> -	dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
> -					 BIASEXTR_SEL(BIASEXTR_127_7));
> -	dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
> -					 BANDGAP_SEL(BANDGAP_96_10));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
> -					 BIAS_BLOCK_ON | BANDGAP_ON);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
> -					 SETRD_MAX | TER_RESISTORS_ON);
> -	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
> -					 SETRD_MAX | POWER_MANAGE |
> -					 TER_RESISTORS_ON);
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
> -	dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
> -	dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
> -	dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
> -	dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
> -	dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
> -
> -	dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
> -	dw_mipi_dsi_phy_write(dsi, 0x71,
> +	dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
> +			      BYPASS_VCO_RANGE |
> +			      VCO_RANGE_CON_SEL(vco) |
> +			      VCO_IN_CAP_CON_LOW |
> +			      REF_BIAS_CUR_SEL);
> +
> +	dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
> +			      CP_CURRENT_3MA);
> +	dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
> +			      CP_PROGRAM_EN | LPF_PROGRAM_EN |
> +			      LPF_RESISTORS_20_KOHM);
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
> +			      HSFREQRANGE_SEL(testdin));
> +
> +	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
> +			      INPUT_DIVIDER(dsi->input_div));
> +	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> +			      LOOP_DIV_LOW_SEL(dsi->feedback_div) |
> +			      LOW_PROGRAM_EN);
> +	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
> +			      LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
> +			      HIGH_PROGRAM_EN);
> +	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
> +			      PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
> +
> +	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
> +			      LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
> +	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
> +			      HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
> +
> +	dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
> +			      POWER_CONTROL | INTERNAL_REG_CURRENT |
> +			      BIAS_BLOCK_ON | BANDGAP_ON);
> +
> +	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
> +			      TER_RESISTOR_LOW | TER_CAL_DONE |
> +			      SETRD_MAX | TER_RESISTORS_ON);
> +	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
> +			      TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
> +			      SETRD_MAX | POWER_MANAGE |
> +			      TER_RESISTORS_ON);
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
> +			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
> +			      THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
> +			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
> +			      BIT(5) | ns2bc(dsi, 100));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
> +			      BIT(5) | (ns2bc(dsi, 60) + 7));
> +
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
> +			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
>  			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
> -	dw_mipi_dsi_phy_write(dsi, 0x72,
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
>  			      THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
> -	dw_mipi_dsi_phy_write(dsi, 0x73,
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
>  			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
> -	dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
> +	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
> +			      BIT(5) | ns2bc(dsi, 100));
>  
>  	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>  				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> -- 
> 1.9.1
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux