Replace the hardcoded register address numerical values with macros to
clarify the code.
Signed-off-by: Nickey Yang <nickey.yang@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 129 ++++++++++++++++++++++-----------
1 file changed, 85 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index b15755b..95ce253 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -254,6 +254,28 @@
#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0)
#define DW_MIPI_NEEDS_GRF_CLK BIT(1)
+#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10
+#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11
+#define PLL_LPF_AND_CP_CONTROL 0x12
+#define PLL_INPUT_DIVIDER_RATIO 0x17
+#define PLL_LOOP_DIVIDER_RATIO 0x18
+#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19
+#define BANDGAP_AND_BIAS_CONTROL 0x20
+#define TERMINATION_RESISTER_CONTROL 0x21
+#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY 0x22
+#define HS_RX_CONTROL_OF_LANE_0 0x44
+#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL 0x60
+#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL 0x61
+#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL 0x62
+#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL 0x63
+#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL 0x64
+#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL 0x65
+#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL 0x70
+#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL 0x71
+#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL 0x72
+#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL 0x73
+#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL 0x74
+
enum {
BANDGAP_97_07,
BANDGAP_98_05,
@@ -447,53 +469,72 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
return ret;
}
- dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
- VCO_RANGE_CON_SEL(vco) |
- VCO_IN_CAP_CON_LOW |
- REF_BIAS_CUR_SEL);
-
- dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
- dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
- LPF_RESISTORS_20_KOHM);
-
- dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
-
- dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
- dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
- LOW_PROGRAM_EN);
- dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
- HIGH_PROGRAM_EN);
- dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
-
- dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
- BIASEXTR_SEL(BIASEXTR_127_7));
- dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
- BANDGAP_SEL(BANDGAP_96_10));
-
- dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
- BIAS_BLOCK_ON | BANDGAP_ON);
-
- dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
- SETRD_MAX | TER_RESISTORS_ON);
- dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
- SETRD_MAX | POWER_MANAGE |
- TER_RESISTORS_ON);
-
- dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
- dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
- dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
- dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
- dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
- dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
-
- dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
- dw_mipi_dsi_phy_write(dsi, 0x71,
+ dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
+ BYPASS_VCO_RANGE |
+ VCO_RANGE_CON_SEL(vco) |
+ VCO_IN_CAP_CON_LOW |
+ REF_BIAS_CUR_SEL);
+
+ dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
+ CP_CURRENT_3MA);
+ dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
+ CP_PROGRAM_EN | LPF_PROGRAM_EN |
+ LPF_RESISTORS_20_KOHM);
+
+ dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
+ HSFREQRANGE_SEL(testdin));
+
+ dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
+ INPUT_DIVIDER(dsi->input_div));
+ dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+ LOOP_DIV_LOW_SEL(dsi->feedback_div) |
+ LOW_PROGRAM_EN);
+ dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+ LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
+ HIGH_PROGRAM_EN);
+ dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
+ PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
+
+ dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+ LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
+ dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+ HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
+
+ dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
+ POWER_CONTROL | INTERNAL_REG_CURRENT |
+ BIAS_BLOCK_ON | BANDGAP_ON);
+
+ dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+ TER_RESISTOR_LOW | TER_CAL_DONE |
+ SETRD_MAX | TER_RESISTORS_ON);
+ dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+ TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
+ SETRD_MAX | POWER_MANAGE |
+ TER_RESISTORS_ON);
+
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
+ TLP_PROGRAM_EN | ns2bc(dsi, 500));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
+ THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
+ THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
+ THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
+ BIT(5) | ns2bc(dsi, 100));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
+ BIT(5) | (ns2bc(dsi, 60) + 7));
+
+ dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
+ TLP_PROGRAM_EN | ns2bc(dsi, 500));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
- dw_mipi_dsi_phy_write(dsi, 0x72,
+ dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
- dw_mipi_dsi_phy_write(dsi, 0x73,
+ dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
- dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
+ dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
+ BIT(5) | ns2bc(dsi, 100));
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
