https://bugs.freedesktop.org/show_bug.cgi?id=41561 --- Comment #6 from Simon Farnsworth <simon.farnsworth@xxxxxxxxxxxx> 2011-10-07 10:53:04 PDT --- I've applied both patches, and am testing on a machine with DVI-I and DisplayPort. Test sequence: 1) Boot system with no outputs connected. 2) Attach a DVI-D monitor, then remove it. 3) Attach a DVI-A to VGA adapter that has no load, then remove it. 4) Attach a DVI-A to VGA adapter that has load but no DDC, then remove it. 5) Attach a DVI-A to VGA adapter that has load and DDC, then remove it. 6) Repeat steps 2 to 5, watching for uevents. Note that the DVI-A to VGA adapter asserts HPD when connected. Results: DVI-D hotplug works fine. There is a delay on the first DVI-D hotplug after the connector has been used for VGA, but I get an event within 10 seconds. No events when I plug in the adapter with no load and wait 20 seconds. No events when I plug in the adapter with load but not DDC and wait 20 seconds. Events on connect only when I plug in the adapter with DDC. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
