https://bugs.freedesktop.org/show_bug.cgi?id=41561 Summary: Hotplug detect does not work for HDMI monitor on Fusion E-350 board Product: DRI Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: DRM/Radeon AssignedTo: dri-devel@xxxxxxxxxxxxxxxxxxxxx ReportedBy: simon.farnsworth@xxxxxxxxxxxx Using airlied-drm-fixes kernel as of commit 6777a4f6898a53974ef7fe7ce09ec41fae0f32db with Alex Deucher's patch "drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1" on top, I'm not seeing uevents from the kernel when I plug and unplug a HDMI monitor. dmesg with drm.debug=0xf shows me the following when I connect a monitor: # dmesg -c [15202.939581] [drm:evergreen_irq_process], r600_irq_process start: rptr 5872, wptr 5888 [15202.939609] [drm:evergreen_irq_process], IH: HPD2 [15203.050597] [drm:radeon_atombios_connected_scratch_regs], DFP1 connected [15203.050605] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 1 to 1 [15203.052661] [drm:output_poll_execute], [CONNECTOR:17:VGA-1] status updated from 2 to 2 radeonreg suggests that the HPD sense bit is correctly set # ./radeonreg regs all | grep 00006028 # DC_HPD2_INT_STATUS 00006028 ff0ff012 (-15732718) When I remove the monitor, I get the following from dmesg and radeonreg: # dmesg -c [15307.075271] [drm:evergreen_irq_process], r600_irq_process start: rptr 5888, wptr 5904 [15307.075300] [drm:evergreen_irq_process], IH: HPD2 [15307.131727] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 192 [15307.131733] Raw EDID: [15307.131738] 3f ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131742] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131745] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131749] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131752] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131756] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131759] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.131763] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [15307.141965] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID [15307.141975] [drm:radeon_atombios_connected_scratch_regs], DFP1 connected [15307.141981] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 1 to 1 [15307.144028] [drm:output_poll_execute], [CONNECTOR:17:VGA-1] status updated from 2 to 2 # ./radeonreg regs all | grep 00006028 # DC_HPD2_INT_STATUS 00006028 ff0ff000 (-15732736) suggesting that HPD sense bits are being updated correctly by the hardware, but that this isn't resulting in uevents following through. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
