Hi Laurent,
On 26/06/17 19:12, Laurent Pinchart wrote:
> The H3 ES1.x exhibits dot clock duty cycle stability issues. We can work
> around them by configuring the DPLL to twice the desired frequency,
> coupled with a /2 post-divider. This isn't needed on other SoCs and
> breaks HDMI output on M3-W for a currently unknown reason, so restrict
> the workaround to H3 ES1.x.
>
> From an implementation point of view, move work around handling outside
> of the rcar_du_dpll_divider() function by requesting a x2 DPLL output
> frequency explicitly. The existing post-divider calculation mechanism
> will then take care of dividing the clock by two automatically.
>
> While at it, print a more useful debugging message to ease debugging
> clock rate issues.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 37 +++++++++++++++++++++++++---------
> 1 file changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 8f942ebdd0c6..6c29981377c0 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -13,6 +13,7 @@
>
> #include <linux/clk.h>
> #include <linux/mutex.h>
> +#include <linux/sys_soc.h>
>
> #include <drm/drmP.h>
> #include <drm/drm_atomic.h>
> @@ -129,10 +130,8 @@ static void rcar_du_dpll_divider(struct rcar_du_crtc *rcrtc,
> for (fdpll = 1; fdpll < 32; fdpll++) {
> unsigned long output;
>
> - /* 1/2 (FRQSEL=1) for duty rate 50% */
> output = input * (n + 1) / (m + 1)
> - / (fdpll + 1) / 2;
> -
> + / (fdpll + 1);
I'm finding this hard to interpret vs the commit-message.
Here we remove the /2 (which affects all targets... is this a problem?)
> if (output >= 400000000)
> continue;
>
> @@ -158,6 +157,11 @@ static void rcar_du_dpll_divider(struct rcar_du_crtc *rcrtc,
> best_diff);
> }
>
> +static const struct soc_device_attribute rcar_du_r8a7795_es1[] = {
> + { .soc_id = "r8a7795", .revision = "ES1.*" },
> + { /* sentinel */ }
> +};
> +
> static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
> {
> const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
> @@ -185,7 +189,20 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
>
> extclk = clk_get_rate(rcrtc->extclock);
> if (rcdu->info->dpll_ch & (1 << rcrtc->index)) {
> - rcar_du_dpll_divider(rcrtc, &dpll, extclk, mode_clock);
> + unsigned long target = mode_clock;
> +
> + /*
> + * The H3 ES1.x exhibits dot clock duty cycle stability
> + * issues. We can work around them by configuring the
> + * DPLL to twice the desired frequency, coupled with a
> + * /2 post-divider. This isn't needed on other SoCs and
But here we discuss 'coupling' it with a /2 post - divider.
My inference here then is that by setting a target that is 'twice' the value -
code later will provide the /2 post-divide?
> + * breaks HDMI output on M3-W for a currently unknown
> + * reason, so restrict the workaround to H3 ES1.x.
> + */
> + if (soc_device_match(rcar_du_r8a7795_es1))
> + target *= 2;
> +
> + rcar_du_dpll_divider(rcrtc, &dpll, extclk, target);
> extclk = dpll.output;
> }
>
> @@ -197,8 +214,6 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
>
> if (abs((long)extrate - (long)mode_clock) <
> abs((long)rate - (long)mode_clock)) {
> - dev_dbg(rcrtc->group->dev->dev,
> - "crtc%u: using external clock\n", rcrtc->index);
>
> if (rcdu->info->dpll_ch & (1 << rcrtc->index)) {
> u32 dpllcr = DPLLCR_CODE | DPLLCR_CLKE
> @@ -215,12 +230,14 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
>
> rcar_du_group_write(rcrtc->group, DPLLCR,
> dpllcr);
> -
> - escr = ESCR_DCLKSEL_DCLKIN | 1;
> - } else {
> - escr = ESCR_DCLKSEL_DCLKIN | extdiv;
> }
> +
> + escr = ESCR_DCLKSEL_DCLKIN | extdiv;
Therefore - is this the post-divider?
If my inferences are correct - then OK:
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
--
KB
> }
> +
> + dev_dbg(rcrtc->group->dev->dev,
> + "mode clock %lu extrate %lu rate %lu ESCR 0x%08x\n",
> + mode_clock, extrate, rate, escr);
> }
>
> rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR,
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
