Hi Thierry, The 2 dt-bindings patches have been "acked" by Rob. The driver itself has been "reviewed" two times by Andrzej. Do not hesitate to send me any comments so I can take them into account before my holidays (end of next week)... Many thanks for your support, Philippe :-) On 07/17/2017 03:19 PM, Philippe CORNU wrote: > Version 3: > - panel-orisetech-otm8009a.c: Remove a FIXME (Andrzej Hajda) > - panel/Makefile & Kconfig: Alphabetical order (Andrzej Hajda) > > Version 2: > - panel-orisetech-otm8009a.c: Add Manufacturer Command Set defines, > add new macro for handling address shifting, improve reset > sequence, use more mipi dcs helpers (Andrzej Hajda) > - dt-bindings/display/panel/orisetech,otm8009a.txt: Fix reset gpio > active level in the example (Andrzej Hajda), Add an "Optional > Properties" section (Rob Herring). > > Version 1: > - Initial commit > > The purpose of this patch is to add support for the Orise Tech > otm8009a 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode). > This LCD panel is used in several STM32 boards. > > Philippe CORNU (3): > dt-bindings: Add vendor prefix for Orise Technology > dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi > panel > drm/panel: Add support for otm8009a panel driver > > .../bindings/display/panel/orisetech,otm8009a.txt | 21 + > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 491 +++++++++++++++++++++ > 5 files changed, 523 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt > create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
