Version 3:
- panel-orisetech-otm8009a.c: Remove a FIXME (Andrzej Hajda)
- panel/Makefile & Kconfig: Alphabetical order (Andrzej Hajda)
Version 2:
- panel-orisetech-otm8009a.c: Add Manufacturer Command Set defines,
add new macro for handling address shifting, improve reset
sequence, use more mipi dcs helpers (Andrzej Hajda)
- dt-bindings/display/panel/orisetech,otm8009a.txt: Fix reset gpio
active level in the example (Andrzej Hajda), Add an "Optional
Properties" section (Rob Herring).
Version 1:
- Initial commit
The purpose of this patch is to add support for the Orise Tech
otm8009a 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode).
This LCD panel is used in several STM32 boards.
Philippe CORNU (3):
dt-bindings: Add vendor prefix for Orise Technology
dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi
panel
drm/panel: Add support for otm8009a panel driver
.../bindings/display/panel/orisetech,otm8009a.txt | 21 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 491 +++++++++++++++++++++
5 files changed, 523 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
