On 03.07.2017 21:19, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> HDMI 2.0 Appendix F suggest that we should keep sending the infoframe
> when switching from 3D to 2D mode, even if the infoframe isn't strictly
> necessary (ie. not needed to transmit the VIC or stereo information).
> This is a workaround against some sinks that fail to realize that they
> should switch from 3D to 2D mode when the source stop transmitting
> the infoframe.
>
> Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/video/hdmi.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> index 1cf907ecded4..af0c8dad29eb 100644
> --- a/drivers/video/hdmi.c
> +++ b/drivers/video/hdmi.c
> @@ -341,10 +341,6 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> u8 *ptr = buffer;
> size_t length;
>
> - /* empty info frame */
> - if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
> - return -EINVAL;
> -
> /* only one of those can be supplied */
> if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
> return -EINVAL;
> @@ -352,8 +348,10 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> /* for side by side (half) we also need to provide 3D_Ext_Data */
> if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
> frame->length = 6;
> - else
> + else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
> frame->length = 5;
> + else
> + frame->length = 4;
>
> length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
>
> @@ -372,14 +370,16 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> ptr[5] = 0x0c;
> ptr[6] = 0x00;
>
> - if (frame->vic) {
> - ptr[7] = 0x1 << 5; /* video format */
> - ptr[8] = frame->vic;
> - } else {
> + if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) {
> ptr[7] = 0x2 << 5; /* video format */
> ptr[8] = (frame->s3d_struct & 0xf) << 4;
> if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
> ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
> + } else if (frame->vic) {
> + ptr[7] = 0x1 << 5; /* video format */
> + ptr[8] = frame->vic;
> + } else {
> + ptr[7] = 0x0 << 5; /* video format */
Changed order of conditionals (vic,s3d versus s3d,vic) could result in
different output, but only in case of incorrect VSIFs, so probably harmless.
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
--
Regards
Andrzej
> }
>
> hdmi_infoframe_set_checksum(buffer, length);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
