From: Alex Deucher <alexander.deucher@xxxxxxx>
DVOOutputControl checks the value of of bios scratch reg 3
on some tables and assumes the encoder is already enabled
if the DFP2_ACTIVE bit is set. Clear that bit so the table
sets the DDIA enable bit properly.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxx
---
drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 9c1fdb2..2554fe3 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1505,7 +1505,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
args.ucAction = ATOM_ENABLE;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ /* workaround for DVOOutputControl on some RS690 systems */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+ u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg);
+ } else
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
args.ucAction = ATOM_LCD_BLON;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
--
1.7.1.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
