Hello Tobias, 2017년 04월 16일 20:51에 Tobias Jakobi 이(가) 쓴 글: > Hello Inki, > > > Inki Dae wrote: >> Hello Tobias, >> >> 2017년 04월 11일 19:52에 Tobias Jakobi 이(가) 쓴 글: >>> Hello Inki, >>> >>> please don't forget to review this series. >> >> Thanks for your contribution, and don't worry about that. Will review this series. > > > Thank you for the confirmation! > > In the meantime, i.e. until we have figured out the IOMMU pagefault, it > would make sense to reject the combination "interlaced mode + video > plane". Should I prepare a patch for that? > I think you may be only person who could look into this as of now. Other person including me would have other tasks more important than this. Thanks, Inki Dae > > With best wishes, > Tobias > > > >> Just sharing a plan for -next, >> >> I plan to have pull-request after reviewing a patch set[1] posted by Andrzej. >> After that, I will start to review your patch set - we would need to enough review this RFC patch set. >> >> It would be very helpful to me if other people could review this. >> >> >> Thanks, >> Inki Dae >> >> [1] https://lists.freedesktop.org/archives/dri-devel/2017-April/138112.html >> >> >>> >>> Also some pointers concerning the video plane flickering and the >>> interlacing issue would be very welcome. >>> >>> Looking at the current register defines for MXR_INT_EN suggests that >>> there are at least three more type of interrupt available. Any chance >>> these could be documented? I hope to get some more insight into this >>> issue, which apparantly is caused by insufficient bandwidth. >>> >>> For the interlacing issue I have done partial progress. I now longer see >>> a IOMMU pagefault, but the video plane is heavily corrupted. Also the >>> dimensions look wrong. >>> >>> While I can somehow guess that VP_MODE_LINE_SKIP does, the >>> VP_MODE_FIELD_ID_AUTO_TOGGLING flag still remains a mystery to me. If >>> possible, I request some documentation for this as well. >>> >>> >>> With best wishes, >>> Tobias >>> >>> >>> >>> Tobias Jakobi wrote: >>>> Hello, >>>> >>>> some recent work I did on Exynos. Patches are based on [1] and [2]. >>>> >>>> Summary: >>>> (a) Enables support for NV12MT in the mixer. >>>> (b) Sanitizes buffer pitch for HW with restrictions. >>>> (c) Misc fixes >>>> >>>> While testing the NV12MT part, I made these interesting observations. >>>> >>>> (1) I used 1920x1080 XRGB8888 on the primary plane, and 1280x768 on the >>>> video plane. With this configuration, it does not matter if you're >>>> using NV12 or NV12MT, the video plane occasionally flickers or shows >>>> heavy artifacting. Reducing the size of the primary plane, e.g. to >>>> 32x32 solves this issue, so my guess is that this is memory bandwidth >>>> issue. Does someone know if one can check for buffer underflows of the >>>> mixer with respect to data passed from the VP? >>>> >>>> (2) Using 1920x1080i (so an interlaced mode) and NV12, the board >>>> immediately dies with an IOMMU pagefault at address zero. I'm >>>> currently investigating this, and it looks like that the VP setup >>>> is wrong here. In particular it should be the source (!) height >>>> and vertical position that should be halfed in interlaced mode, and >>>> not the destination. Need to look more into this. >>>> >>>> Anyway, both the issues are independant of the patches, so please >>>> review! :-) >>>> >>>> With best wishes, >>>> Tobias >>>> >>>> >>>> [1] http://www.spinics.net/lists/linux-samsung-soc/msg58640.html >>>> [2] http://www.spinics.net/lists/linux-samsung-soc/msg58644.html >>>> >>>> Tobias Jakobi (8): >>>> drm/exynos: mixer: fix chroma comment in vp_video_buffer() >>>> drm/exynos: mixer: enable NV12MT support for the video plane >>>> drm/exynos: mixer: simplify {vp_video,mixer_graph}_buffer() >>>> drm/exynos: mixer: remove src offset from mixer_graph_buffer() >>>> drm/exynos: introduce BYTE_PITCH capability >>>> drm/exynos: add BYTE_PITCH cap for all supported planes >>>> drm/exynos: consistent use of cpp >>>> drm/exynos: simplify set_pixfmt() in DECON and FIMD drivers >>>> >>>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 17 +++++------ >>>> drivers/gpu/drm/exynos/exynos7_drm_decon.c | 13 +++----- >>>> drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 ++ >>>> drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 ++ >>>> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 17 ++++------- >>>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 37 ++++++++++++++++++++++ >>>> drivers/gpu/drm/exynos/exynos_mixer.c | 44 ++++++++------------------- >>>> 7 files changed, 71 insertions(+), 61 deletions(-) >>>> >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> >>> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
