Hello Tobias, 2017년 04월 11일 19:52에 Tobias Jakobi 이(가) 쓴 글: > Hello Inki, > > please don't forget to review this series. Thanks for your contribution, and don't worry about that. Will review this series. Just sharing a plan for -next, I plan to have pull-request after reviewing a patch set[1] posted by Andrzej. After that, I will start to review your patch set - we would need to enough review this RFC patch set. It would be very helpful to me if other people could review this. Thanks, Inki Dae [1] https://lists.freedesktop.org/archives/dri-devel/2017-April/138112.html > > Also some pointers concerning the video plane flickering and the > interlacing issue would be very welcome. > > Looking at the current register defines for MXR_INT_EN suggests that > there are at least three more type of interrupt available. Any chance > these could be documented? I hope to get some more insight into this > issue, which apparantly is caused by insufficient bandwidth. > > For the interlacing issue I have done partial progress. I now longer see > a IOMMU pagefault, but the video plane is heavily corrupted. Also the > dimensions look wrong. > > While I can somehow guess that VP_MODE_LINE_SKIP does, the > VP_MODE_FIELD_ID_AUTO_TOGGLING flag still remains a mystery to me. If > possible, I request some documentation for this as well. > > > With best wishes, > Tobias > > > > Tobias Jakobi wrote: >> Hello, >> >> some recent work I did on Exynos. Patches are based on [1] and [2]. >> >> Summary: >> (a) Enables support for NV12MT in the mixer. >> (b) Sanitizes buffer pitch for HW with restrictions. >> (c) Misc fixes >> >> While testing the NV12MT part, I made these interesting observations. >> >> (1) I used 1920x1080 XRGB8888 on the primary plane, and 1280x768 on the >> video plane. With this configuration, it does not matter if you're >> using NV12 or NV12MT, the video plane occasionally flickers or shows >> heavy artifacting. Reducing the size of the primary plane, e.g. to >> 32x32 solves this issue, so my guess is that this is memory bandwidth >> issue. Does someone know if one can check for buffer underflows of the >> mixer with respect to data passed from the VP? >> >> (2) Using 1920x1080i (so an interlaced mode) and NV12, the board >> immediately dies with an IOMMU pagefault at address zero. I'm >> currently investigating this, and it looks like that the VP setup >> is wrong here. In particular it should be the source (!) height >> and vertical position that should be halfed in interlaced mode, and >> not the destination. Need to look more into this. >> >> Anyway, both the issues are independant of the patches, so please >> review! :-) >> >> With best wishes, >> Tobias >> >> >> [1] http://www.spinics.net/lists/linux-samsung-soc/msg58640.html >> [2] http://www.spinics.net/lists/linux-samsung-soc/msg58644.html >> >> Tobias Jakobi (8): >> drm/exynos: mixer: fix chroma comment in vp_video_buffer() >> drm/exynos: mixer: enable NV12MT support for the video plane >> drm/exynos: mixer: simplify {vp_video,mixer_graph}_buffer() >> drm/exynos: mixer: remove src offset from mixer_graph_buffer() >> drm/exynos: introduce BYTE_PITCH capability >> drm/exynos: add BYTE_PITCH cap for all supported planes >> drm/exynos: consistent use of cpp >> drm/exynos: simplify set_pixfmt() in DECON and FIMD drivers >> >> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 17 +++++------ >> drivers/gpu/drm/exynos/exynos7_drm_decon.c | 13 +++----- >> drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 ++ >> drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 ++ >> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 17 ++++------- >> drivers/gpu/drm/exynos/exynos_drm_plane.c | 37 ++++++++++++++++++++++ >> drivers/gpu/drm/exynos/exynos_mixer.c | 44 ++++++++------------------- >> 7 files changed, 71 insertions(+), 61 deletions(-) >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
